上行链路大气波前畸变对剪切光束成像技术的影响

剪切光束成像（sheared-beam imaging，SBI）技术是一种利用三束剪切相干激光照明的非传统成像技术，该技术通过探测器阵列接收目标反射回波的散斑图进行计算成像，在对远距离暗弱目标高分辨率成像方面有着独特的优势.大气湍流引起的光束波前畸变是影响SBI成像质量的一个关键因素，因此本文从湍流引起的激光波前畸变对目标频谱信息提取的影响入手，建立了光束波前畸变对成像影响的理论模型.利用多层相位屏模型模拟了近地25 km大气对SBI光束传输的影响.通过计算机仿真，得到了不同激光发射孔径和不同成像距离时SBI的成像结果.仿真结果表明，选取合适的发射孔径尺寸可以有效缓解湍流对光束波前质量的影响，从而提升成像质量.在Hutchin的研究基础上，对孔径选择范围的已有研究成果进行了扩展与深化.给出了SBI系统发射孔径尺寸选取的建议，为SBI对不同高度目标成像的像质差异分析提供了参考.

Effect of uplink atmospheric wavefront distortion on image quality of sheared-beam imaging

Sheared-beam imaging (SBI) is a non-traditional imaging technique in which utilized are three sheared coherent lasers for illumination, and detector array to receive the intensity of speckle pattern reflected from the target. Finally the image of target can be reconstructed by computer algorithm from the data collected before. The SBI has some advantages in high resolution imaging for long-distance space targets. However, the wavefront distortion caused by atmospheric turbulence is a key factor affecting the imaging quality of SBI. Therefore, this paper focuses on the influence of wavefront distortion caused by atmospheric turbulence on the extraction of target spectral information. Theoretical model of the influence of wavefront distortion on imaging is established. The effects of low-order and high-order atmosphere turbulence on SBI imaging quality are analysed respectively. It turns out that low-order atmosphere turbulence does not result in poor image quality nor low-resolution, and just change the position of target on the image plane. But the image quality can be degraded when the wavefront root mean square (RMS) value at the target plane, caused by high-order atmosphere turbulence, exceeds λ/20. Beam emitted from larger aperture becomes more susceptible to perturbing effect, thus forming lower-quality wavefront. Considering that after passing through the atmosphere, beam also travels a long distance to reach the target surface. Targets at different heights will obtain different wavefront quality due to the diffraction of light. Thus the final wavefront quality is determined by turbulence intensity, aperture size and target height. Multi-layer phase-screen model and Hufnagel-Valley model are used to simulate the influences of near-earth (25 km) atmosphere on wavefront distortion at target plane with different imaging distances. Simulation results show that the wavefront RMS value rises with the increase of transmitting aperture diameter, and decreases with the increase of imaging distance. Transmitting aperture sizes in a range from 0.2 times r₀ to twice r₀ have been recommended for effective imaging by HutchinHutchin R A 1993 Proc. SPIE 2029 161]. However, we find in our simulations that beams on the order of 2 r₀ may cause significant wavefront error at short range target, and under some circumstances the clear image of target cannot be reconstructed. The imaging results of SBI at different laser transmitting apertures and different imaging distances are obtained, and evaluated by Strehl ratio. Imaging results show that choosing appropriate transmitting aperture size can effectively improve the imaging quality. But for the short-range targets, aperture size selection range presented by Hutchin can be too broad to be practicable. This paper suggests some approaches to choosing suitable aperture size for SBI system, and also providing a reference for the difference analysis of imaging quality for targets in different heights.