| 热可调液晶填充微结构聚合物光纤设计及特性分析 |
| |
| 引用本文： | 王豆豆,王丽莉,李冬冬.热可调液晶填充微结构聚合物光纤设计及特性分析[J].物理学报,2012,61(12):128101-128101. |
| |
| 作者姓名： | 王豆豆 王丽莉 李冬冬 |
| |
| 作者单位： | 中国科学院西安光学精密机械研究所,瞬态光学与光子技术国家重点实验室,西安710119 |
| |
| 基金项目： | 国家自然科学基金(批准号: 60437020, 61108061)和国家高技术研究发展计划(863) (批准号: 2007AA032452)资助的课题. |
| |
| 摘 要： | 通过在微结构聚合物光纤(mPOF)的包层空气孔中填充液晶材料获得了高度热可调的带隙型mPOF. 带隙随温度的增加发生显著的蓝移, 带隙上边界的温度灵敏度可达-5.5 nm/℃. 采用全矢量有限元方法对模场特性以及基模有效模场面积的分析结果表明, 该填充液晶的mPOF在带隙的中心波长附近具有大的有效模场面积, 和相同结构未填充液晶的mPOF连接时具有较高的功率耦合效率. 研究结论为mPOF在温度传感领域的应用及各种可调光纤器件的制备提供了理论参考.
|
| 关 键 词： | 微结构聚合物光纤 液晶 光子带隙 有限元方法 |
| 收稿时间： | 2011-08-29 |
Design and analysis of thermally tunable liquid-crystal-filled microstructured polymer optical fiber |
| |
| Wang Dou-Dou,Wang Li-Li,Li Dong-Dong.Design and analysis of thermally tunable liquid-crystal-filled microstructured polymer optical fiber[J].Acta Physica Sinica,2012,61(12):128101-128101. |
| |
| Authors: | Wang Dou-Dou Wang Li-Li Li Dong-Dong |
| |
| Institution: | State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Science, Xi'an 710119, China |
| |
| Abstract: | A highly tunable bandgap-guiding microstructured polymer optical fiber(mPOF) is designed by infiltrating the cladding air holes with a liquid crystal.Bandgap is blue shifted as temperature is increased.A high thermal tuning sensitivity of-5.5 nm/℃is achieved at the long-wavelength edge of the bandgap.Mode properties and effective mode area of the fundamental mode are investigated by using the full-vector finite element method.The designed fiber has a large effective area and high power transmission coefficient between the index guiding modes and the bandgap guiding modes.Our results provide theoretical references for applications of mPOF in sensing and tunable fiber-optic devices. |
| |
| Keywords: | microstructured polymer optical fiber liquid crystal photonic bandgap finite element method |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《物理学报》浏览原始摘要信息 |
| 点击此处可从《物理学报》下载免费的PDF全文 |
