Photoelastic investigation of interfacial fracture between orthotropic and isotropic materials

Static and dynamic fracture of interfaces between orthotropic and isotropic materials were studied using photoelasticity. In this study, a bi-material specimen made of PSM-1^® and Scotchply^® 1002, a unidirectional glass fiber reinforced epoxy composite, was used. Two fiber orientations, fibers parallel to the interface (α=0°) and fibers perpendicular to the interface (α=90°) were considered. Center crack bi-material specimens having different crack lengths were loaded quasi-statically and the full-field isochromatics were recorded using a digital camera. The complex stress intensity factor corresponding to each crack length was calculated from the isochromatics and the values were compared to that obtained from boundary collocation method. Dynamic interfacial fracture was studied with an edge crack bi-material geometry for the two different fiber orientations. The isochromatics around the propagating crack were recorded using a digital high-speed camera. The fracture parameters such as crack speed, complex stress intensity factor and energy release rate were extracted from the isochromatics using the asymptotic stress field equations. The complex stress intensity factor obtained from the static experiments was in close agreement with that calculated using the boundary collocation method. The results also indicated that the fiber orientation with respect to the interface influences the fracture parameters for stationary and propagating cracks.