Investigation of the performance of bipolar transverse plate ESP in the sintering flue control |
| |
| Institution: | 1. Vienna University of Technology, Institute of Chemical Engineering, Getreidemarkt 9/166, 1060 Vienna, Austria;2. University of Natural Resources and Life Sciences Vienna, Institute for Chemical and Energy Engineering, Peter-Jordan-Strasse 82, 1190 Vienna, Austria;1. Department of Petroleum Engineering, Petroleum University of Technology, Ahwaz, Iran;2. Dynamical Systems & Control (DSC) Research Lab., Department of Electrical Engineering Department, School of Engineering, Persian Gulf University, P.O. Box 75169, Bushehr, Iran;3. Department of Chemical and Materials Engineering, Faculty of Engineering, King Abdulaziz University, P.O. Box 80204, Jeddah, 21589, Saudi Arabia;4. Department of Mathematics and Computer Sciences, Faculty of Arts and Sciences, Çankaya University, 06530 Ankara, Turkey;5. Institute of Space Sciences, Magurele-Bucharest, Romania;1. College of Machinery and Automation, Wuhan University of Science and Technology, Wuhan Hubei, 430081, PR China;2. Enterprise Management Department, Shandong Iron & Steel Group Co., Ltd., Jinan Shandong, 250101, PR China;1. ʻʻAlexandru Ioan Cuza” University of Iasi, Environmental Science School, 11 Carol I, 700506 Iasi, Romania;2. ʻʻAlexandru Ioan Cuza” University of Iasi, Faculty of Chemistry, 11 Carol I, 700506 Iasi, Romania;3. ʻʻGh. Asachi” Technical University of Iasi, 71 D. Mangeron, 700050 Iasi, Romania;4. Romanian Inventors Forum, 3 Petru Movila Street, 700089 Iasi, Romania;5. Dipartimento di Chimica, Università di Torino, Via Pietro Giuria 5, 10125 Torino, Italy;1. Beijing Key Laboratory of Passive Nuclear Power Safety and Technology, North China Electric Power University, Beijing 102206, China;2. Microfluidic Foundry L.L.C., San Pablo, CA 94806, USA;1. Ogarev Mordovia State University, Bol’shevitskaya street, 68, Saransk, Russia;2. Kazan Federal University, Kremlevskaja street, 18, Kazan, Russia;3. General Physics Institute of Russian Academy of Sciences, Vavilova street, 38, Moscow, Russia |
| |
| Abstract: | In order to improve the particle collection efficiency of the electrostatic precipitator (ESP), a transverse plate ESP with bipolar discharge electrodes is proposed. The simulations of the velocity distribution have shown that when the inlet velocity is 1 m/s, within the range of 40 mm from electrode plate, the average velocities of windward side and leeward side are less than 0.7 m/s and 0.3 m/s respectively. It is clear that the velocity near the collection electrode plate of this bipolar ESP is much lower than that of the ordinary ESP at the same inlet velocity. This low velocity can lead to higher efficiency for fine dust collection due to the less dust re-entrainment in ESP. It is also found that the average velocities are getting lower when the distance between plates electrodes are greater than 150 mm in accordance with the simulations. The voltage current characteristics of the bipolar ESP are superior to the ordinary ESP. The pressure drop of the bipolar ESP is about 30% higher than that of the ordinary one. The dust penetration of the bipolar ESP is about 54% less than that of the ordinary ESP when the sintering dust with 25.405 μm mass median diameter is used as the test particulate under the condition of the electric field from 2.1 kV/cm to 3.2 kV/cm and the velocity from 1.0 m/s to 1.5 m/s. |
| |
| Keywords: | Electrostatic precipitator Velocity distribution Voltage current characteristics Pressure drop Dust penetration |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
