首页 | 本学科首页   官方微博 | 高级检索  
     检索      

多条形电极束流能散度探测器的张角优化
引用本文:赵敬霞,曹建社,裴士伦,叶强,赵晓岩.多条形电极束流能散度探测器的张角优化[J].强激光与粒子束,2006,18(8):1355-1358.
作者姓名:赵敬霞  曹建社  裴士伦  叶强  赵晓岩
作者单位:中国科学院 高能物理研究所, 北京 100049
摘    要: 采用Surperfish对北京正负电子对撞机的多条形电极束流能散度探测器进行了电磁场模拟计算。在带模拟束流的情况下,计算分析了探测器对束流位置和能散度的分辨能力与电极张角之间的关系,首次计算了条形电极间的电容耦合综合强度。电极张角优化结果表明:在不考虑噪声水平的情况下,电极张角为20°时,探测器的灵敏度和分辨率达到最优。而当噪声影响很大时,可以适当增加电极张角,同时考虑减小噪声的措施。

关 键 词:条形电极  电极张角  耦合强度  灵敏度  能散度探测器
文章编号:1001-4322(2006)08-1355-04
收稿时间:2006-06-01
修稿时间:2006-06-27

Optimization of electrode opening angle for beam energy spread monitor
ZHAO Jing-xia,CAO Jian-she,PEI Shi-lun,YE Qiang,ZHAO Xiao-yan.Optimization of electrode opening angle for beam energy spread monitor[J].High Power Laser and Particle Beams,2006,18(8):1355-1358.
Authors:ZHAO Jing-xia  CAO Jian-she  PEI Shi-lun  YE Qiang  ZHAO Xiao-yan
Institution:Institute of High Energy Physics, Chinese Academy of Sciences, P.O.Box 918-9, Beijing 100049, China
Abstract:The electromagnetic field of beam energy spread monitor (BESM) with multi-stripline electrodes for BEPCII is calculated by Superfish code. The electromagnetic field computations with simulation beam are used to analyze the relations between the electrode opening angle and the resolutions of beam position and energy-spread and calculate the coupling strength over all the electrodes of the BESM. The optimization design of the electrode opening angle for BESM has been done. Without considering the noise, the BESM with 20° electrode opening angle has the best sensitivity and resolution.
Keywords:Stripline electrode  Electrode opening angle  Coupling strength  Sensitivity  Beam energy spread monitor(BESM)
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号