Micro-humps formed in excimer laser ablation of polyimide using mask projection system

In this paper we report the results of an investigation into surface deformation caused by thermal effects during excimer laser ablation of polyimide. Obvious surface deformation around hole entrances was observed during the experiment. The surface topology and cross section of the ablated holes were analyzed using topography measurement tool and scanning electron microscopy. It was shown that a micro-hump of 17 to 150 nm in height and 1 to 3 μm in width was formed above the level of the unablated surface. The deformed surface showed rough and color-changed characteristics. An optical diffraction model was employed to explain the cause of this kind of deformation. It was found that the ablating and heating by a near- and under-threshold laser beam became a thermal effect in polyimide material ablation, which was contributed to by a diffraction effect of the optical projection system. Received: 9 October 2001 / Accepted: 17 October 2001 / Published online: 23 January 2002