过渡层厚度对Be/CuCrZr热等静压连接性能影响

在铍上用物理气相沉积(PVD)镀上10μmTi 和10μmCu，再添加不同厚度的(分别为0.00mm、0.25mm、 0.50mm、0.75mm、1.00mm)无氧铜作为中间过渡层，与CuCrZr/316L(N)复合板基座铜合金侧通过热等静压连接。采用光学显微镜、扫描电镜(SEM)与电子探针(EPMA)、X 射线衍射仪(XRD)、剪切试验等方法确定了界面组织与性能。试验结果表明：各厚度无氧铜模块连接成功，界面无裂纹、空洞等缺陷，钛铜间出现三层明显的反应层，分别为CuTi₂、CuTi 以及Cu₄Ti。添加无氧铜厚度越大，剪切强度越大。

Influence of interlayer’s thickness on Be/CuCrZr HIP diffusion bonding joints performance

Beryllium (PVD coated on Ti, 10μm, Cu, 10μm), different thickness of oxygen-free cooper (OFC) sheets as transitionlayer and CuCrZr/316L(N) explosive bi-metallic plates are bonded by hot isostatic pressing (HIP), optical microscope, scanning electron microscope(SEM), Electron Probe Micro-analyzer(EPMA), X-ray diffraction( XRD), shearing tests are used to verify the diffusion bonding performance. Results turn out to be all kinds of mock-ups successfully bonded, no any cracks have been found in the diffusion bonding interface, three different kinds of diffusion layers are found between titanium and copper which are CuTi₂、CuTi and Cu₄Ti, respectively. The thicker of the OFC layer is, the better the shearing testing performance is.