A low frequency torsional rheometer

Summary An instrument has been developed for measuring the viscoelastic behaviour of polymer melts at low frequencies, in the range 10^–3 to 50 Hz. The sample is contained between a cone and a fixed plate, or between parallel plates. The moving member is driven in torsional oscillation through a torsion wire. The amplitude of the resulting oscillation is compared in amplitude and phase with the driven end of the torsion wire. The amplitudes are measured digitally using optical diffraction gratings, and either an oscilloscope or a high-speed ultra-violet recorder is used to determine the phase angle between the two signals. The moving member is supported on an air bearing, which provides a very low friction support with a high degree of positional control thus giving a well defined sample geometry. The torsion wire is driven using a vibrator with a d.c. drive amplifier fed from a very low frequency oscillator. The sample temperature is controlled to better than 0.01 °C, with temperature gradients across the sample of a similar order of magnitude. The temperature range of the instrument is from –50 °C to +200 °C.The angular resolution of the measuring system is 3 × 10^–5 radius, so that an accuracy of better than ±1% in the amplitude measurements can be obtained with the amplitude of shear in the sample kept sufficiently low that a linear stress-strain relation is maintained.With 3 figures