Effect of inflation pressure on motion resistance ratio of a high-lug agricultural tyre |
| |
Authors: | AK Elwaleed A Yahya M Zohadie D Ahmad AF Kheiralla |
| |
Institution: | Department of Biological and Agricultural Engineering, Faculty of Engineering, University Putra Malaysia, 43400 Serdang, Selangor D.E., Malaysia |
| |
Abstract: | A single wheel tyre facility at University Putra Malaysia (UPM) was used to check the validity of Wismer–Luth and Brixius equations in predicting the motion resistance ratio of a high-lug agricultural tyre and to investigate the effect of inflation pressure. A Bridgestone 5-12, 4 ply, lug M was tested on sandy-clay-loam soil. The experiments were conducted by running the tyre in towing mode. Three inflation pressures (i.e., 166, 193 and 221 kPa) were investigated and wheel numerics ranging between 0 and 70. The analysis of covariance (ANCOVA) revealed that both inflation pressure and wheel numeric have significant effects on tyre motion resistance ratio. Regression analysis was also conducted to determine the closeness of fit for Wismer–Luth’s and Brixius’ equations in predicting the motion resistance ratio of the tested tyre. Finally, three new logarithmic models for tyre motion resistance were formulated. The advantage of reducing tyre inflation pressure from 221 (nominal pressure) to 193 kPa on the motion resistance ratio of the high-lug agricultural tyre was pronounced. However, the tyre’s motion resistance ratio deteriorated with further reduction in tyre inflation pressure from 221 (nominal pressure) to 166 kPa. |
| |
Keywords: | Tyre Traction Motion resistance ratio Inflation pressure |
本文献已被 ScienceDirect 等数据库收录! |
|