Non-slipping JKR model for transversely isotropic materials |
| |
Authors: | S. Chen C. Yan A. Soh |
| |
Affiliation: | 1. LNM, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China;2. Department of Mechanical Engineering, The University of Hong Kong, Hong Kong, China |
| |
Abstract: | A generalized plane strain JKR model is established for non-slipping adhesive contact between an elastic transversely isotropic cylinder and a dissimilar elastic transversely isotropic half plane, in which a pulling force acts on the cylinder with the pulling direction at an angle inclined to the contact interface. Full-coupled solutions are obtained through the Griffith energy balance between elastic and surface energies. The analysis shows that, for a special case, i.e., the direction of pulling normal to the contact interface, the full-coupled solution can be approximated by a non-oscillatory one, in which the critical pull-off force, pull-off contact half-width and adhesion strength can be expressed explicitly. For the other cases, i.e., the direction of pulling inclined to the contact interface, tangential tractions have significant effects on the pull-off process, it should be described by an exact full-coupled solution. The elastic anisotropy leads to an orientation-dependent pull-off force and adhesion strength. This study could not only supply an exact solution to the generalized JKR model of transversely isotropic materials, but also suggest a reversible adhesion sensor designed by transversely isotropic materials, such as PZT or fiber-reinforced materials with parallel fibers. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|