| Abstract: | The films of N‐ethyl chitosan were prepared via the solution‐casting technique with formic acid as a solvent. The solutions with different concentrations (35 and 40 wt %) were prepared previously from dilute solution (1 wt %) via evaporating process. The crystalline morphology of these films was investigated by means of polarized optical microscopy and scanning electron microscopy. Normal spherulites with a low growth rate formed in the casting films. The different morphologies of spherulite appeared in the films cast from the solutions with different concentrations. After further crystallizing for a few days, the spherulites were decorated by thousands of needlelike extended‐chain crystals, which had a typical size of ～50 μm (length) × 2～5 μm (width) × 1～2 μm (height) in the central part of the spherulite, but a typical size of ～5 μm (lenght)× 1～2 μm (width) × 1～2 μm (height) in the fringe part of the spherulite. The real concentration for crystallization was determined to be 65–82 wt%. Thus, the crystallization actually appeared in supersaturated solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2033–2038, 2003 |
