触发预电离一体化脉冲氙灯电源设计 |
| |
引用本文: | 李玺钦,赵娟,吴红光,刘云涛,丁明军.触发预电离一体化脉冲氙灯电源设计[J].强激光与粒子束,2014,26(7):075004. |
| |
作者姓名: | 李玺钦 赵娟 吴红光 刘云涛 丁明军 |
| |
作者单位: | 1.中国工程物理研究院 流体物理研究所, 脉冲功率科学与技术重点实验室, 四川 绵阳 621 900 |
| |
基金项目: | 国家部委级基础研究项目 |
| |
摘 要: | 采用高压触发预电离为一体+脉冲形成网络触发氙灯的技术路线,分别设计了脉冲氙灯电源系统中高压触发、预燃电流维持两个功能单元。根据脉冲氙灯160mm×9mm、极间距70mm的技术指标,成功设计了一台具有手动和电脉冲触发功能的方波脉冲氙灯电源。氙灯充电电压300~900V可调,光脉冲宽度为150μs±20μs,光脉冲上升时间不超过90μs,触发延迟不超过90μs,触发抖动在±2μs范围内。给出了单次触发情况下脉冲氙灯电源输出的实验结果,验证了所采用的设计原理和技术方法的可行性。
|
关 键 词: | 预电离 脉冲形成网络 高压触发 脉冲氙灯 |
收稿时间: | 2013/12/13 |
Design of xenon flash lamp supply adopting integrally triggering and pre-ionization |
| |
Institution: | 1.Key Laboratory of Pulsed Power,Institute of Fluid Physics,CAEP,P.O.Box 919-107,Mianyang 621900,China |
| |
Abstract: | A new xenon flash lamp triggering method is discussed based on trigger and pre-ionization integrally. The pre-ionized lamp is lighted by high voltage trigger circuit, and the current is kept by pulse forming network for 150 s. A trigger power supply is designed for the xenon lamp with a length of 160 mm, a diameter of 9 mm and a gap of 70 mm. The pre-ionized voltage amplitude is 300-900 V, pulse width is 150 s20 s, raising-time is less than 90 s, trigger delay time is less than 90 s, and jitter time is less than 2 s. Experimental results has testified the feasibility of the design theory and method. |
| |
Keywords: | pre-ionization pulse forming network trigger xenon flash lamp |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|