Femtosecond pulsed laser ablation with spatial filtering

With the rise in demand for miniaturized features with better acute edge acuity and negligible thermal damage zone, one of the key vital areas lies in the refinement of the quality of the laser beam itself. Spatial filter is routinely used in optical micromachining systems to smoothen the Gaussian profile of the machining spot in order to obtain a feature of the desired quality. However, its profile smoothening effect has never been investigated for femtosecond pulsed laser micromachining process since the extremely high peak power of femtosecond pulses will cause damage on the filtering aperture of spatial filter. During the development of an acousto-optical micromachining system using femtosecond pulses, we found that if the damage of the filtering aperture can be circumvented, spatial filter can improve the machining quality of femtosecond pulse ablation, especially when ablation is conducted at low-fluency range (just above the ablation threshold fluency). In this paper, we investigate and demonstrate both the improvement and potential that beam refinement can bring about. In our experiment, a series of test patterns were ablated with a 400 nm second-harmonic Ti:Sapphire femtosecond laser of 150 fs duration at varying pulse energy ranging from 31 to 39 nJ. The specimen used in the experiment is a platinum- (Pt) sputtered coating of 100 nm thickness on a quartz substrate. The results show a significant improvement in the constancy of the shape as well as the size of ablated feature, revealing an improved beam profile and beam energy distribution due to spatial filtering.