首页 | 本学科首页   官方微博 | 高级检索  
     

硬脂酸甲酯的合成研究
引用本文:杨亚静,韩骐伟,杨玉峰. 硬脂酸甲酯的合成研究[J]. 化学研究, 2012, 23(5): 16-18
作者姓名:杨亚静  韩骐伟  杨玉峰
作者单位:1. 南开大学化学学院,天津,300071
2. 河南教育学院,河南郑州,450046
摘    要:
以252型强酸性阳离子交换树脂为催化剂,利用硬脂酸与甲醇在自制反应器中的酯化反应合成了硬脂酸甲酯;考察了酯化反应条件对酯化率的影响.结果表明,酯化反应最佳条件为:硬脂酸40g,甲醇流量0.30mL/min,反应温度95℃,反应时间60min;相应的酯化率可达99%以上.该方法反应条件温和、操作步骤简单,所得产品收率高、质量好.

关 键 词:硬脂酸甲酯  强酸性离子交换树脂  自制反应器  合成

Study on synthesis of methyl stearate
YANG Ya-jing , HAN Qi-wei , YANG Yu-feng. Study on synthesis of methyl stearate[J]. Chemical Research, 2012, 23(5): 16-18
Authors:YANG Ya-jing    HAN Qi-wei    YANG Yu-feng
Affiliation:1. College of Chemistry, Nankai University, Tianjin 300071, China ; 2. Henan Institute of Education, Zhengzhou 450046, Henan, China)
Abstract:
Methyl stearate was synthesized by esterification between stearic acid and methanol in a self-made reactor with strong acidic cation exchange resin (252) as a catalyst. The effects of esterifieation conditions on the esterification rate were investigated. Results demonstrate that the optimal reaction condition is established as stearie acid dosage of 40 g, methanol flow rate of 0.30 mL/min, reaction temperature of 95 ℃, and reaction time of 1 h. Relevant esteri- fication rate under the optimal condition is above 99 %. The present approach has mild reaetion conditions, simple procedures, and high yield of desired product, while the final product has desired quality.
Keywords:methyl stearate  strong acidic cation exchange resin  self-made reactor  synthesis
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号