| 碱性聚合物电解质燃料电池电极疏水性对性能的影响 |
| |
| 引用本文： | 谭力盛,潘婧,李瑶,庄林,陆君涛.碱性聚合物电解质燃料电池电极疏水性对性能的影响[J].电化学,2013,19(3):199-203. |
| |
| 作者姓名： | 谭力盛 潘婧 李瑶 庄林 陆君涛 |
| |
| 作者单位： | 武汉大学 化学电源材料与技术湖北省重点实验室，化学与分子科学学院，湖北 武汉 430072 |
| |
| 基金项目： | 国家重点基础研究发展计划(No.2012CB932800,No.2012CB215500);国家高技术研究发展计划(No.2011AA050705);国家自然科学基金(No.20933004,No.21125312)资助 |
| |
| 摘 要： | 本文报道H2-O2型碱性聚合物电解质燃料电池（APEFC）电极疏水性对放电性能的影响. 以季铵化聚砜（QAPS）或自交联型季铵化聚砜（xQAPS）碱性聚电解质（APE）作为隔膜和电极中的电解质（Ionomer）、聚四氟乙烯（PTFE）作为疏水添加剂调控催化层疏水性. 结果表明，阳极催化层疏水性的增强有利于提升电池放电性能，而阴极催化层疏水性适中时电池性能最优. 采用疏水性较强的xQAPS作为电解质并在阳极催化层中添加适量PTFE疏水剂，在60 oC和100%相对湿度的条件下，280 mA·cm-2电流密度时，电池最高功率密度达132 mW·cm-2.
|
| 关 键 词： | 碱性聚合物电解质燃料电池 催化层 疏水性 季铵化聚砜 聚四氟乙烯 |
| 收稿时间： | 2012-10-12 |
Influence of Electrode Hydrophobicity on Performance of Alkaline Polymer Electrolyte Fuel Cells |
| |
| TAN Li-sheng,PAN Jing,LI Yao,ZHUANG Lin,LU Jun-tao.Influence of Electrode Hydrophobicity on Performance of Alkaline Polymer Electrolyte Fuel Cells[J].Electrochemistry,2013,19(3):199-203. |
| |
| Authors: | TAN Li-sheng PAN Jing LI Yao ZHUANG Lin LU Jun-tao |
| |
| Institution: | (College of Chemistry and Molecular Sciences,Wuhan University,Wuhan 430072,China) |
| |
| Abstract: | In the present work, we study the influence of the electrode hydrophobicity on the performance of alkaline polymer electrolyte fuel cells (APEFCs). QAPS or xQAPS is employed as the membrane and the ionomer, while PTFE is used as a hydrophobic additive in order to adjust the electrode hydrophobicity. We find that enhancing the hydrophobicity of anode can promote the performance of APEFCs, while a moderate hydrophobicity of cathode is required to achieve optimal performance. By using xQAPS as the electrolyte and adding some PTFE in the anode, a peak power density of 132 mW·cm-2 can be obtained at a current density of 280 mA·cm-2 when the APEFC single cell is operated under 100% RH at 60 ºC. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《电化学》浏览原始摘要信息 |
| 点击此处可从《电化学》下载免费的PDF全文 |
