Development of an ICP-HRIDMS method for accurate determination of traces of silicon in biological and clinical samples

An inductively coupled plasma-high resolution isotope dilution mass spectrometric (ICP-HRIDMS) method in combination with a microwave-assisted decomposition technique has been developed for the determination of traces of silicon in biological and clinical samples. A 30Si-enriched spike solution was used for the isotope dilution step. Decomposition of the samples was achieved by use either of HNO3 or a mixture of HNO3 and HF. By application of both methods of digestion to the same sample it was possible to differentiate between a poorly soluble silicate fraction and an HNO3-soluble silicon species. Traces of silicon were determined in different reference materials, which are not certified for this element, and in other biological and clinical samples. A concentration range of 1-600 microgram g(-1) was covered by the different samples. For homogeneous samples relative standard deviations of 2-4% were obtained. The detection limit was strongly affected by the blank. In this connection purification of water, used in the analytical procedure, was especially critical. The blank contribution of the ICP-MS instrument could be minimized by applying a nebulizer and a spray chamber made of PFA, a sapphire injection tube, and a silicon nitride torch. Under these conditions detection limits of 0.15 microgram g(-1) and 0.2 microgram g(-1) were obtained for the HNO3 and HNO3-HF digestion methods, respectively, when a sample weight of 0.5 g was used. With regard to expected silicon content this enables determination in almost all biological and clinical samples. The ICP-HRIDMS results were compared with those recently obtained in an interlaboratory study. This isotope-dilution method is an potential option for certification of silicon in reference materials, a method for which is still required.