Experimental evaluation of DC electric field effect on the thermoacoustic behaviour of flat premixed flames

One promising approach to eliminate thermoacoustic instabilities in combustion appliances is the use of adaptive control of the flame/burner acoustic transfer function (TF). Application of a DC electric field (EF) as a spatially distributed, easily and quickly adjustable and low-energy method to affect the flame behaviour may be considered as a possible actuation method to control the flame TF. Experimental evaluation of such a possibility is the main goal of the present study. The effect of a DC EF on the acoustic TF of premixed flat burner-surface stabilized flames is studied systematically as a function of the following parameters: flow velocity, equivalence ratio, applied voltage and burner geometry. It is established that the response of the flame TF on the DC EF can be characterized as a TF shift towards higher frequencies. The mechanism of TF alteration is related to the decrease of the flame stand-off distance and the related increase of the burner deck surface temperature. From a practical point of view, the efficiency of the EF control of the flat flame TF is restricted to a relatively narrow frequency range around the position of the TF resonance peak. To get insight into the physics of the EF–flame interaction, the method of 1] to measure the EF effect on the adiabatic flame speed is improved and the measurement range is extended. The new measurements allow a revision of previous results and allow an explanation for the ambiguity in the old measurements.