Macromolecule-Metal Complexes for Gas Separation

Macromolecule-copper(I) chloride complexes have been prepared for the separation of carbon monoxide and ethylene from gas mixtures with hydrogen, nitrogen, carbon dioxide, methane, and water. A toluene solution of a polystyrene-aluminum copper(I) chloride complex can separate carbon monoxide selectively and retains this function even on contact with gas containing water. Strong charge-transfer absorption bands have been found in the 380-500 nm region for the toluene solution of polystyrene-aluminum copper(I) chloride complex. A solution of 1, 3-diphenylpropane-aluminum copper(I) chloride complex also exhibits similar absorption bands. A continuous variation plot using the chemical shift change in ¹³C-NMR shows a 1:1 interaction between 1,3-diphenylpropane and aluminum copper(I) chloride. These results suggest a two-way interaction between the adjacent phenyl groups of polystyrene and aluminum copper(I) chloride. A resin bead of crosslinked polystyrene-aluminum copper(I) chloride complex has been prepared as a solid adsorbent. The water resistance of the solid macromolecular complex depends on the nature of the solvent used in the preparation of the solid adsorbent. Carbon disulfide is a suitable solvent. A selective adsorbent of ethylene has been prepared from a macroreticular polystyrene resin with primary and secondary amino groups and copper(I) chloride. The selectivity of ethylene against ethane and that of carbon monoxide against carbon dioxide increase with an increasing amount of supported copper(I) chloride.