Numerical simulation: The dynamic behavior of reinforced concrete plates under normal impact

This investigation deals with the use of the finite element method on the reinforced concrete structural dynamic response and failure behavior when subjected to the projectile impacts of different velocities, using the test conducted in [S.J. Hanchak, M.J. Forrestal, E.R. Young, J.Q. Ehrgott, Perforation of concrete slabs with 48 MPa (7 ksi) and 140 MPa (20 ksi) unconfined compressive strengths, Int. J. Impact Eng. 12 (1992) 1–7]. The Johnson–Holmquist concrete material constitutive law model is employed to simulate the large strains, high strain states and high pressures to which the concrete is subjected. The projectile impact velocity ranges from 381 m/s to 1058 m/s. Numerical simulations demonstrate that the Johnson–Holmquist concrete material constitutive model can describe the different failure modes without any predefined defects in the element mesh, and normally obtain good agreement between the numerical simulations and test results.