Au/Ag2O与Ag掺杂的Au粉催化剂上CO氧化反应：Au-Ag双金属催化剂活性位

有关用于各种氧化反应中Au-Ag双金属催化剂存在显著协同效应的来源有两种观点：(1) AgOx块与体相Au表面的接触界面起重要作用，体相Au的表面是催化活性位；(2) Au-Ag双金属催化剂中形成的Au-Ag合金中电荷从Ag转移到Au上，可能对催化剂活性起作用。因此，确定Au表面上Ag是以氧化物还是以金属合金形式存在可能是深度理解该协同效应的关键。
　　为了检测和验证催化剂活性的增加是由于Ag2O与Au纳米粒子的紧密接触，在密闭循环反应体系中比较研究了Au/Ag2O和Ag2O催化剂上CO氧化反应。将CO/O2摩尔比为2的混合气通入到这二个催化剂上来跟踪压力降低的速率。因而检测了气体的消耗量和CO2的生成量。结果发现，在稳态下Au/Ag2O和Ag2O催化剂的压力降低的速率不存在差别。这两个催化剂上压力的降低是由于Ag2O中表面晶格氧被混合气中CO的还原所致。 Au/Ag2O催化剂上得到的结果与以前研究的具有氧化表面的Ag掺杂的Au粉末(Ag/Au-b)上的一致，也表明AgOx块与体相Au表面界面周边不大可能是CO氧化反应催化活性位。基于具有稳态表面的Ag/Au-b样品上的研究结果，我们认为AgOx物种被还原为0价态Ag而形成的Ag-Au合金很可能是催化活性位。

An examination of active sites on Au-Ag bimetallic catalysts based on CO oxidation over Au/Ag2O and a comparison to Ag-contaminated Au powder

There are two theories regarding the origin of the remarkable synergistic effect observed in Au‐Ag bimetallic catalysts when applied to various oxidative reactions. One is based on the importance of the contact interfaces between AgOx regions and the surface of the bulk Au as active working sites, while the other holds that charge transfer from Ag to Au in a surface Au‐Ag alloy causes the catalytic activity. One key point in examining these theories and determining the origin of the synergy in‐volves determining whether or not Ag exists as an oxide or as a metallic alloy on the Au surface. To confirm that enhanced activity results from contact between Ag2O and Au nanoparticles (NPs), a comparative study of catalytic CO oxidation over Au/Ag2O and Ag2O was performed in the present work, using a closed recirculation reaction system. A reaction mixture consisting of a stoichiometric composition of CO and O2 (CO/O2=2/1) was supplied to both catalysts and the resulting pressure decrease rates were tracked, from which the amounts of gas consumed as well as the quantity of CO2 produced were determined. The steady state reactions of both Au/Ag2O and Ag2O did not lead to any meaningful difference in the rate of pressure decrease during the oxidation. The pressure decrease over both catalysts was attributed to the reduction of surface lattice O on Ag2O by CO. The results obtained for Au/Ag2O are in good agreement with previous data resulting from the use of Ag‐contaminated Au powder (Ag/Au‐b) having an oxidized surfaces. This finding suggests that the perimeters between AgOx zones and the bulk Au surface may not function as active sites during CO oxidation. A review of previous results obtained with Ag/Au‐b specimens having so‐called steady state surfaces indicates that AgOx species in such materials are reduced to the 0 state to form a Ag‐Au alloy that provides the active sites.