首页 | 本学科首页   官方微博 | 高级检索  
     检索      


Elastohydrodynamic lubrication in a plane slider bearing
Authors:Riccardo Malvano  Furio Vatta
Institution:(1) Centro di Studio per la Dinamica dei fluidi (CNR), Politecnico di Torino, Torino;(2) Dipartimento di Meccanica, Politecnico di Torino, Torino
Abstract:Summary The present work deals with the case of a two-dimensional slider bearing with a rigid pad and an elastic bearing. Fluid viscosity is assumed to be only a pressure function. We determined the bearing deformation, the pressure distribution and the load capacity at different values of the inclination angle of the slider, with a numerical integration of the system consisting of the elasticity and Reynolds equations. The results show that, with an iso-viscous fluid, bearing elasticity causes a load capacity decrease. Instead bearing elasticity together with the variation of fluid viscosity due to pressure causes a load capacity greater than that of the iso-viscous case (beta=0).
Sommario Il presente lavoro studia il problema della coppia prismatica lubrificata con pattino rigido di allungamento infinito e cuscinetto deformabile; si suppone che la viscosità del fluido sia funzione della sola pressione. Il sistema di equazioni, costituito dall'equazione di Reynolds e dall'equazione dell'elasticità, è stato risolto numericamente, determinando la deformazione del cuscinetto, lcaronandamento della pressione e la capacità di carico per diversi valori dell'inclinazione del pattino. I risultati dimostrano che, con fluido isoviscoso, la deformabilità del cuscinetto determina una riduzione della capacità di carico. Se si considera, invece, lcaroneffetto combinato dell'elasticità del cuscinetto e della variazione della viscosità del fluido, la capacità di carico risulta maggiore di quella che si ottiene con fluido isoviscoso (beta=0).

Nomenclature 
$$\bar \zeta $$
zeta/L - 
$$\bar \xi $$
xgr/L - 
$$\bar x$$
x/L - 
$$\bar x'$$
xprime/L - beta 
$$\frac{{\pi ^2 }}{{24}}\frac{{\alpha E^2 L}}{{\mu _0 V}}(h_1 /L)^4 $$
- ¯C CZ/h 1 - E elasticity modulus - h film thickness - H elastic deformation of the bearing - h 1 minimum film thickness - h 2 inlet thickness - gamma inclination of the pad - 
$$\bar h$$
h Z/h 1 - 
$$\bar H$$
HZ/h 1 - L pad length - mgr viscosity - mgr 0 viscosity with no over-pressure - p over pressure - Deltap P ec-P rc where:ec=elastic caserc=rigid case - 
$$\bar p$$
P h 1 2 /6mgr0VL - tau h 2/h 1=1+gammaL/h 1 - FV bearing velocity - W load capacity per unit width - 
$$\bar W$$
Wh 2 1 /6mgr0 VL 2 - Z pgrE h 3 1 /12 mgr0 VL 2 A first version of this paper was presented at the 7th National AIMETA congress, held at Trieste, October 2–5, 1984. This work was supported by C.N.R.
Keywords:
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号