首页 | 本学科首页   官方微博 | 高级检索  
     检索      

蒸汽喷射式制冷系统模型建立与仿真
引用本文:葛研军,阳俊,葛强.蒸汽喷射式制冷系统模型建立与仿真[J].低温与超导,2011,39(11):48-52.
作者姓名:葛研军  阳俊  葛强
作者单位:大连交通大学机械工程学院,大连,116028
基金项目:大连市科技计划项目,辽宁省科技计划项目
摘    要:对蒸汽喷射制冷工作过程中能量转化进行了深入分析,建立了制冷系统中的三个关键部件——喷射器、冷凝器及蒸发器的热力学模型.以此为基础,结合运行参数,采用Matlab软件,对喷射系数、蒸汽消耗量以及循环水耗量进行仿真计算.探讨了以喷射系数为评定标准时,工作蒸汽压力Pg、冷凝温度Tc、蒸发温度Te对系统性能的影响.分析结果表明...

关 键 词:蒸汽喷射式制冷  热力学模型  喷射系数  仿真

Performance analysis and simulation of thermodynamic model in steam ejector refrigeration system
Ge Yanjun,Yang Jun,Ge Qiang.Performance analysis and simulation of thermodynamic model in steam ejector refrigeration system[J].Cryogenics and Superconductivity,2011,39(11):48-52.
Authors:Ge Yanjun  Yang Jun  Ge Qiang
Institution:(School of Mechanical Engineering,Dalian Jiaotong Univeristy,Dalian 116028,China)
Abstract:The conversion of energy was analyzed thoroughly in the working process of steam ejector refrigeration system.The thermodynamic models of ejector,condenser and evaporator were built.Based on operating parameters,the simulative calculations for entrainment ratio,steam consumption and water consumption were made with the software of MATLAB.Taking the entrainment ratio as evaluation standard,it discussed the influence on system performance caused by generator pressure(Pg),evaporator temperature(Te) and condenser temperature(Tc).The results indicate that only when Pg≤15atm,Te≥8℃,Tc≤37℃ the system can work with better economical efficiency.
Keywords:Stream ejector refrigeration  Thermodynamic model  Entrainment ratio  Simulation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号