首页 | 本学科首页   官方微博 | 高级检索  
     

含铁微孔EU-1/ZSM-5复合分子筛的合成和表征
引用本文:杨瑞娟,杨冬花,武正簧,冯晓娜,窦涛,吴忠华,李志宏,闫泽,王凡,汤琼. 含铁微孔EU-1/ZSM-5复合分子筛的合成和表征[J]. 燃料化学学报, 2013, 41(5): 601-606
作者姓名:杨瑞娟  杨冬花  武正簧  冯晓娜  窦涛  吴忠华  李志宏  闫泽  王凡  汤琼
作者单位:1. College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024, China;2. Research Institute of Special Chemicals, Taiyuan University of Technology, Taiyuan 030024, China;3. CNPC Key Laboratory of Catalysis, College of Chemical Engineering, China University of Petroleum(Beijing), Beijing 102249, China;4. Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100039, China
基金项目:国家重点基础发展规划(973计划,2012CB215002);国家自然科学基金(20973123);煤转化国家重点实验室开放基金(11-12-603)
摘    要:采用预置晶种法合成了含铁的微孔EU-1/ZSM-5复合分子筛,并采用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、热重-微分热重(TG-DTG)、N2吸附-脱附、紫外-可见吸收光谱(UV-vis DRS)、X射线吸收精细结构(XAFS)等手段进行了表征。结果表明,复合分子筛具有EU-1和ZSM-5的特征衍射峰,是两种晶相相互作用的分子分散晶相材料,微孔孔径较Fe-EU-1分子筛有所增大。随原始溶胶中铁的质量分数增加,复合分子筛具有的23.09°和23.94°处的特征衍射峰逐渐向低角度方向偏移;紫外-可见漫反射谱图中在220~245 nm出现了宽的吸收谱带;XAFS表征表明,1s→3d电子跃迁的弱吸收峰逐渐增强,同时在吸收边顶部出现的1s→4p吸收峰逐渐由宽变窄。合成工艺的最佳条件为,原始溶胶中铁的质量分数为0.075%~0.15%,晶种添加比例为15.0%~21.0%,晶种SiO2/Al2O3物质的量比为50~60。

关 键 词:预置晶种  Fe-EU-1/ZSM-5  复合分子筛  合成  
收稿时间:2012-09-12

Synthesis and characterization of microporous EU-1/ZSM-5 composite zeolite containing iron
YANG Rui-juan,YANG Dong-hua,WU Zheng-huang,FENG Xiao-na,DOU Tao,WU Zhong-hua,LI Zhi-hong,YAN Ze,WANG Fan,TANG Qiong. Synthesis and characterization of microporous EU-1/ZSM-5 composite zeolite containing iron[J]. Journal of Fuel Chemistry and Technology, 2013, 41(5): 601-606
Authors:YANG Rui-juan  YANG Dong-hua  WU Zheng-huang  FENG Xiao-na  DOU Tao  WU Zhong-hua  LI Zhi-hong  YAN Ze  WANG Fan  TANG Qiong
Affiliation:1 (1.College of Chemistry and Chemical Engineering,Taiyuan University of Technology,Taiyuan 030024,China; 2.Research Institute of Special Chemicals,Taiyuan University of Technology,Taiyuan 030024,China; 3.CNPC Key Laboratory of Catalysis,College of Chemical Engineering,China University of Petroleum(Beijing),Beijing 102249,China; 4.Institute of High Energy Physics,Chinese Academy of Sciences,Beijing 100039,China)
Abstract:Microporous EU-1/ZSM-5 composite zeolites containing iron were synthesized using preset crystal seed method. The as-synthesized Fe-EU-1/ZSM-5 samples were characterized by a serious of techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric-derivative thermogravimetric (TG-DTG), N2 adsorption/desorption, UV-visible diffuse reflectance spectroscopy (UV-Vis DRS) and X-ray absorption fine structure (XAFS). The results show that the composite zeolite is found consisting characteristic diffraction peaks for two kinds of zeolite structure: EU-1 and ZSM-5. The composite zeolite is a kind of molecular dispersion material with two crystal phases interaction and its micropore size is larger than Fe-EU-1 zeolite. With increasing the mass fraction of Fe in the original sol-gel, the characteristic diffraction peaks of composite zeolites in the 23.09° and 23.94° gradually migrate to lower angle direction. UV-vis spectrum shows that there is a broad absorption band at about 220~245 nm. The XAFS results show that the week pre-edge absorption peak for 1s→3d gradually strengthen, at the same time the absorption peak for 1s→4p in the top of absorption edge has tapper. The optimized synthesis conditions for the microporous EU-1/ZSM-5 composite zeolites containing iron are as follows: 0.075%~0.15% of the mass fraction of Fe in the original sol-gel, 15.0%~21.0% of the mass fraction of ZSM-5 zeolite in the original sol-gel and 50~60 of SiO2/Al2O3 mol ratio of ZSM-5 zeolite.
Keywords:preset crystal seed  Fe-EU-1/ZSM-5 zeolite  composite molecular sieves  synthesize  
本文献已被 CNKI 等数据库收录!
点击此处可从《燃料化学学报》浏览原始摘要信息
点击此处可从《燃料化学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号