首页 | 本学科首页   官方微博 | 高级检索  
     检索      

退火温度对CdSe纳米薄膜的形成及光电性能影响
引用本文:徐哲,薛晋波,杨慧娟,武军伟,胡兰青.退火温度对CdSe纳米薄膜的形成及光电性能影响[J].无机化学学报,2016,32(4):589-594.
作者姓名:徐哲  薛晋波  杨慧娟  武军伟  胡兰青
作者单位:太原理工大学新材料界面科学与工程教育部重点实验室, 太原 030024,太原理工大学材料科学与工程学院, 太原 030024;太原理工大学新材料工程技术研究中心, 太原 030024,太原理工大学材料科学与工程学院, 太原 030024;太原理工大学新材料工程技术研究中心, 太原 030024,太原理工大学新材料界面科学与工程教育部重点实验室, 太原 030024,太原理工大学新材料界面科学与工程教育部重点实验室, 太原 030024
基金项目:国家自然科学基金(No.51402209)、山西省基础研究项目(No.2015021075)、浙江省固态光电器件重点实验室基金(No.2013E100221502)和校青年基金(No.2013Z033)资助项目。
摘    要:在室温下,采用循环伏安法在ITO上沉积CdSe纳米薄膜。利用X射线衍射仪(XRD)、场发射扫描电镜(FESEM)、原子力显微镜(AFM)、X射线光电子能谱分析(XPS)、紫外-可见(UV-VIS)分光光度计以及电化学工作站对不同温度退火后的CdSe纳米薄膜的晶体结构、形貌、光学性能、光电化学性能进行表征和测试。结果表明,退火温度对CdSe纳米薄膜的形貌和性能起到关键性作用。薄膜表面平整、厚度均匀,且由呈纳米颗粒状的立方相CdSe构成;经退火后,CdSe纳米颗粒出现不同程度的长大现象,Se含量随退火温度的升高而减少。紫外-可见吸收光谱表明随着退火温度的升高,CdSe纳米薄膜对可见光的吸收发生红移,表明禁带宽度逐渐减小,表现出量子尺寸效应。通过光电流测试表明随着退火温度的升高,CdSe薄膜的光电响应效应显著提高。

关 键 词:电化学沉积  CdSe纳米薄膜  退火温度  光电响应效应
收稿时间:2015/11/2 0:00:00
修稿时间:2016/1/21 0:00:00

Influence of Annealing Temperature on CdSe Thin Films Forming and Photoelectric Characteristics
XU Zhe,XUE Jin-Bo,YANG Hui-Juan,WU Jun-Wei and HU Lan-Qing.Influence of Annealing Temperature on CdSe Thin Films Forming and Photoelectric Characteristics[J].Chinese Journal of Inorganic Chemistry,2016,32(4):589-594.
Authors:XU Zhe  XUE Jin-Bo  YANG Hui-Juan  WU Jun-Wei and HU Lan-Qing
Institution:Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China,College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China;Research Center of Advanced Materials Science and Technology, Taiyuan University of Technology, Taiyuan 030024, China,College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024, China;Research Center of Advanced Materials Science and Technology, Taiyuan University of Technology, Taiyuan 030024, China,Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China and Key Laboratory of Interface Science and Engineering in Advanced Materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
Abstract:CdSe nano thin films were electrodeposited on ITO glass by using cyclic voltammetry method.The crystal structure, morphology, optical properties and photoelectric properties of CdSe nano thin films prepared with different temperature are investigated by X-ray diffraction(XRD), field emission scanning eletron microscopy(FESEM), atomic force microscope(AFM), X-ray photoelectron spectroscopy(XPS), UV-Vis spectra and electrochemical workstation.The results show that annealing temperature plays a critical role in morphology and properties of CdSe nano thin films. The sample, smooth surface and uniform thickness, consist of numorous nanoparticles with zinc blende phase, and the size of CdSe nanoparticles grew up as increasing the annealing temperature.The content of Selenium decreased with the increase of annealing temperature.Thus, the absorption peak of the samples have red shift and the band gap energy gradually decrease, which is due to quantum size effect.In addition, photocurrent test of the samples show obviously photoelectric response under visible light illumination, and the photocurrent density of the samples increased with increase of annealing temperature.
Keywords:electrochemical deposition  CdSe nano thin films  annealing temperature  photoelectric response
本文献已被 CNKI 等数据库收录!
点击此处可从《无机化学学报》浏览原始摘要信息
点击此处可从《无机化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号