Trapping of charge carriers in colloidal particles of self-assembled films from TiO(2) and poly(vinyl sulfonic acid)

Self-assembled electrodes consisting of TiO(2) nanoparticles and poly(vinyl sulfonic acid) (PVS) were prepared by the layer-by-layer (LbL) technique. The electrostatic interaction between the TiO(2) nanoparticles and PVS allowed the growth of visually uniform multilayers of the composite, with high control of the thickness and nanoarchitecture. The electrochemical and chromogenic properties of these TiO(2)/PVS films were examined in an electrolytic solution of 0.5 M LiClO(4)/propylene carbonate. The presence of two intercalation sites was noted during the positive potential scan, and they were attributed to different mobilities of charge carriers. Several charge/discharge cycles demonstrated the trapping of charge carriers in the TiO(2) sites. The absorbance change associated with the oxidation of the trapping sites was attributed to electronic transitions involving energy states in the gap band formed due to the strong distortion of the TiO(2) host. Using the quadratic logistic equation (QLE), it was possible to analyze the electronic intervalence transfer from Ti(3+) to Ti(4+). Using the parameters obtained from this fitting, the amount of trapping sites in the LbL film was also determined. Electrochemical impedance spectroscopy (EIS) data gave the time constant associated with diffusion and the trapping sites. The diffusion coefficient of lithium ions changed from ca. 4.5 x 10(-13) cm(2) s(-1) to 3.0 x 10(-14) cm(2) s(-1) for all the potential range applied, indicating that PVS did not hinder the ionic transport within the LbL film. Finally, on the basis of the spectroelectrochemical data and scanning electron micrographs, the trapping effects were attributed to the colloidal particles of Li(0.55)TiO(2).