月表尘埃颗粒带电的机理及应用研究

研究月尘颗粒在电子束环境下以及紫外源辐照下的带电机理,利用数值方法模拟月尘颗粒在不同背景环境下的充电过程,以探索月表尘埃颗粒的带电机理,进而便于地面月尘环境模拟装置选择合适的月尘带电方式进行空间模拟实验.给出了尘埃在电子束环境下的充电方程,并将紫外辐射带电与具体应用相结合.通过模拟结果可知,在电子束环境下,月尘表面的电荷数随粒径尺寸增大,随电子枪辐照束斑半径减少,随电子枪流强的增加而增多;在紫外源的辐照下,月尘表面电荷数随颗粒尺寸的增大以及紫外线辐照度的增加而增多.由月尘颗粒受太阳紫外辐照带电的数值模拟结果可知,月尘需要在太阳长时间的辐照下才可以带上可观的电荷数,地面模拟该过程需增加辐照源来加速实验.通过模拟结果的分析比较并结合"空间环境模拟装置"中对月尘舱的设计要求,最终优选紫外源辐照带电方式作为月尘颗粒的带电方案.

Charging mechanism and application of lunar dust grains

Since the moon has an extremely rarefied atmosphere, the full spectrum of the electromagnetic radiation of the sun reaches the surface, charging the surface dust and affecting its current charge state. Lunar surface dust thus remains electrostatically charged at all times. Charged lunar dust will adversely affect the operations of most mechanical systems required by manned and unmanned exploration missions. Charged dust will also stubbornly adhere to solar panels and thermal radiators, thus reducing their efficiencies. Researches on the charged lunar dust can help to investigate lunar dusty environment as well as to solve those particle-induced problems by both simulation and experiment in laboratory. In this work, two different charging processes of charged lunar dust in the environment of electron beam and the radiation of ultraviolet source are considered. The computer numerical simulation method is used to analyze these two different charging processes of lunar dust, to explore the charging mechanisms of lunar dusts, and to choose an appropriate way of charging for the lunar environment simulation device in laboratory. On the basis of the classic dust charging equation, the charging equation of a dust in pure electron environment is given for the first time in this work. Meanwhile, the charging process under ultraviolet radiation is discussed and combined with the specific application of charging dusts. A solver of fourth-order Runge-Kutta algorithm is made to solve differential equations under two different irradiation sources. The main simulation results show that:1) in electron environment, the surface dust charge number increases as the particle size and the current intensity of electron guns increase, while the charge number increases as the beam spot radius of electron guns decreases; 2) under ultraviolet radiation, the dust charge number increases with the particle size and irradiance increasing, but charging efficiency is slow. A great dust charge number needs a long time radiation from sun (equivalent to 74 deuterium lamps), which means that more ultraviolet radiation sources are essential to speeding up the experiment in laboratory. Although the calculated efficiency of ultraviolet radiation is lower than electron irradiation, the secondary-electron emission, the scattering and the transmission process of electron irradiation are ignored, which can greatly reduce the efficiency of charging by energetic electron guns in the actual experiment. Therefore, comparing these two charging mechanisms and considering the actual design requirements for the space environment simulation device, charging by lots of ultraviolet radiation is an appropriate scheme for electrification of lunar dusts.