| HL-2M 支撑系统制造工艺研究 |
| |
| 引用本文： | 乔 涛,刘德权,林 涛,郑小舟,HL-M 研制团队.HL-2M 支撑系统制造工艺研究[J].核聚变与等离子体物理,2021,41(Z1):420-424. |
| |
| 作者姓名： | 乔 涛 刘德权 林 涛 郑小舟 HL-M 研制团队 |
| |
| 作者单位： | (1. 核工业西南物理研究院，成都 610041；2. 武汉重型机床集团有限公司，武汉 430000) |
| |
| 摘 要： | 在 HL-2M 装置支撑组件的研制中，采用了特制控氮不锈钢、结合 GMS310 焊丝和 Ar(96%)+N2(4%)
保护气体的焊接工艺以及低速和大进给量的机加方式把磁导率控制在≤1.03 的设计范围内。为保障 HL-2M 装置装
配时线圈系统的精确定位和安装，在研制阶段对极向场线圈支撑子系统进行了预装。
|
| 关 键 词： | HL-2M 装置 支撑部件 焊接磁导率 预装 |
| 收稿时间： | 2021-04-15 |
Manufacturing technology of HL-2M support system |
| |
| QIAO Tao,LIU De-quan,LIN Tao,ZHENG Xiao-zhou,HL-M Development Team.Manufacturing technology of HL-2M support system[J].Nuclear Fusion and Plasma Physics,2021,41(Z1):420-424. |
| |
| Authors: | QIAO Tao LIU De-quan LIN Tao ZHENG Xiao-zhou HL-M Development Team |
| |
| Institution: | (1. Southwestern Institute of Physics, Chengdu 610041;
2. Wuhan Heavy Duty Machine Tool Group, Wuhan 430000) |
| |
| Abstract: | The magnetic permeability of HL-2M support system was controlled within the design value, i.e.
≤1.03, when the special nitrogen control stainless steel was adopted, the GMS310 welding wire and Ar (96%) +
N2 (4%) shielding gas were employed in welding, and the scheme of low speed and large feed rate in machining
process was performed. In order to ensure the precise positioning of the coil system during assembly, it was
necessary to preinstall the poloidal field coils support subsystem in development stage. |
| |
| Keywords: | HL-2M tokamak Support components Welding magnetic permeability Preassembly
|
|
| 点击此处可从《核聚变与等离子体物理》浏览原始摘要信息 |
| 点击此处可从《核聚变与等离子体物理》下载免费的PDF全文 |
