On the output characteristics of a semiconductor optical amplifier driven by an ultrafast optical time division multiplexing pulse train |
| |
Authors: | KE Zoiros R Chasioti CS Koukourlis T Houbavlis |
| |
Institution: | aLightwave Communications Research Group, Department of Electrical and Computer Engineering, Democritus University of Thrace, 12 Vas. Sofias Str., 67 100, Xanthi, Greece;bLaboratory of Telecommunications Systems, Department of Electrical and Computer Engineering, Democritus University of Thrace, 12 Vas. Sofias Str., 67 100, Xanthi, Greece |
| |
Abstract: | A comprehensive theoretical analysis of a semiconductor optical amplifier (SOA) that is subject to an ultrafast optical time division multiplexing pulse stream is presented with the help of a simple but efficient model developed for this purpose. The model combines the necessary set of mathematical equations with the appropriate simplifying assumptions to describe in the time domain gain saturation and recovery for the case of multiple incoming pulses. In this manner, analytical expressions can be obtained for the power and chirp profile of the amplified pulses, essentially extending the work that has been performed for a single pulse only. This allows to identify the critical operational parameters and to investigate and evaluate their effect on these two output characteristics. The derived simulation curves are thoroughly studied to specify the limitations imposed on the SOA small signal gain and carrier lifetime as well as on the full-width at half-maximum (FWHM) and energy of the input pulses and, based on a series of logical arguments, to extract useful rules concerning their selection so as to achieve improved performance with respect to the practical applications of all-optical switching and pulse compression. The obtained results indicate that due to the continuous insertion of pulses, the requirements for the SOA small signal gain and the input pulse energy are stringent than those for the case of isolated pulse amplification. The combination of these two parameters determines also the regime in which the amplifier must be biased to operate in order to ensure distortionless pulse amplification and enhanced chirp for efficient pulse compression and it has been found that low saturation is necessary for the former case whilst heavy saturation for the latter. The scopes of the corresponding requirements for the carrier lifetime and the FWHM are also tight but to a less extent and can be simply satisfied with the available photonics technology. These results are in good agreement with the available experimental data essentially proving the validity and robustness of the model. The model can be thus applied to predict the behavior of more complex all-optical circuits of enhanced functionality in which the SOA is the basic functional device. |
| |
Keywords: | Modelling Semiconductor optical amplifier Optical pulse train amplification characteristics Optical time division multiplexing All-optical signal processing |
本文献已被 ScienceDirect 等数据库收录! |
|