| 聚苯胺/碳化钨导电复合材料的合成 |
| |
| 引用本文： | 黄惠,许金泉,郭忠诚.聚苯胺/碳化钨导电复合材料的合成[J].功能高分子学报,2009,22(1). |
| |
| 作者姓名： | 黄惠 许金泉 郭忠诚 |
| |
| 作者单位： | 昆明理工大学材料与冶金工程学院,昆明,650093 |
| |
| 基金项目： | 全国优秀博士学位论文作者专项资金资助项目(20052253) |
| |
| 摘 要： | 以苯胺和过硫酸胺为原料,采用原位聚合方法合成了聚苯胺/碳化钨(PANI/WC)导电复合材料。研究了反应体系中碳化钨的含量对复合材料电导率的影响,确定了较佳的聚合条件,并且通过FT-IR、XRD、XPS和DSC-TGA等手段对复合材料的结构和性能进行了表征和分析。结果表明:碳化钨(WC)的加入提高了聚苯胺的电子导电性能,复合材料中聚苯胺组分为无定型,WC的晶型在反应前后并未发生变化,复合材料的热稳定性好并且质子化程度更高。
|
| 关 键 词： | 聚苯胺 碳化钨 复合材料 原位聚合 |
Synthesis of PANI/WC Conductive Composite |
| |
| HUANG Hui,XU Jin-quan,GUO Zhong-cheng.Synthesis of PANI/WC Conductive Composite[J].Journal of Functional Polymers,2009,22(1). |
| |
| Authors: | HUANG Hui XU Jin-quan GUO Zhong-cheng |
| |
| Institution: | School of Materials and Metallurgical Engineering;Kunming University of Science and Technology;Kunming 650093;China |
| |
| Abstract: | The polyaniline/tungsten carbide(PANI/WC) composite is synthesized by in situ polymerization using aniline and ammonium persulfate as starting materials.The conductivity on the tungsten carbide content is studied in detail,and the proper polymerization condition is obtained.The structure and stability of the composites are characterized by FT-IR spectra,XRD,XPS and DSC-TGA analysis.The results show that the electrical conductivity is enhanced obviously due to the introduction of WC to PANI.PANI in the compo... |
| |
| Keywords: | polyaniline tungsten carbide composites in situ polymerization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
