| 氧化铈添加量对 M_(80)S_(20) 激光涂敷层的显微组织和摩擦学性能的影响 |
| |
| 引用本文： | 王长生,于宗汉,李全安,于晖,于凯,刘家浚,王铀.氧化铈添加量对 M_(80)S_(20) 激光涂敷层的显微组织和摩擦学性能的影响[J].摩擦学学报,1997(1). |
| |
| 作者姓名： | 王长生 于宗汉 李全安 于晖 于凯 刘家浚 王铀 |
| |
| 作者单位： | 洛阳工学院材料工程系，洛阳轴承厂工艺处，洛阳船舶材料研究所，清华大学摩擦学研究所 |
| |
| 基金项目： | 清华大学摩擦学国家重点实验室基金 |
| |
| 摘 要： | 通过金相分析、扫描电子显微镜分析和透射电子显微镜分析，以及在无润滑条件下的摩擦磨损对比试验研究，考察了稀土氧化物ＣｅＯ２添加量对（Ｆｅ，Ｃｒ，Ｎｉ，Ｗ，Ｍｏ）８０（Ｂ，Ｓｉ，Ｃ）２０铁基非晶自熔合金粉末喷涂－激光重熔涂敷层的显微组织和摩擦磨损性能的影响．研究结果表明，在给定的试验条件下，稀土氧化物ＣｅＯ２的添加量（以质量分数计）为８％的改性效果比其添加量分别为４％和１２％的改性效果都好，可以明显改善激光涂敷层的显微组织，提高涂敷层的显微硬度，而且此时涂敷层的摩擦学性能最好．
|
| 关 键 词： | 稀土氧化物 合金粉末 激光涂敷层 显微组织 |
Influence of Ceric Oxide Addition on the Microstructure and Wear Resistance of Laser Remelted M80S20 Alloy Coating |
| |
| Abstract: | The effects of ceric oxide (CeO 2) addition on the microstructure and wear resistance of laser remelted coatings of Fe base self fluxing amorphous alloy M80S20 have been investigated on the basis of metallographic,SEM and TEM analyses and dry wear tests. The experimental results show that the microstructures of laser remelted M80S20 alloy coating can be remarkably improved by addition of about 8%(in mass fraction)CeO 2,under the given conditions, the modification effect of adding 8%CeO 2 is better than that of adding 4%CeO 2 and 12%CeO 2 and correspondingly then microhardness and wear resistance of the coating can be enhanced. |
| |
| Keywords: | rare earth oxide alloy powder laser remelted coating microstructure |
| 本文献已被 CNKI 等数据库收录！ |
