首页 | 本学科首页   官方微博 | 高级检索  
     检索      

油剂混合区的工艺条件对催化裂化汽油改质的影响
引用本文:王刚,杨光福,高金森.油剂混合区的工艺条件对催化裂化汽油改质的影响[J].燃料化学学报,2009,37(3):311-317.
作者姓名:王刚  杨光福  高金森
作者单位:State Key Laboratory of Heavy Oil Processing, China University of Petroleum (Beijing), Beijing 102249, China
基金项目:教育部科学技术研究重大项目 
摘    要:利用连续式小型提升管催化裂化实验装置研究了原料预热温度、再生剂温度、油剂混合区温度和剂油比等油剂混合区的工艺条件对催化裂化汽油改质的影响规律。结果表明,降低再生剂温度、油剂混合区温度和剂油比均可以降低干气和焦炭的产率,同时也对催化裂化汽油改质的效果产生了影响。其中,再生剂温度对干气和焦炭产率影响最大;剂油比对催化裂化汽油改质的效果影响显著。降低再生剂温度、剂油比和油剂混合区温度一定程度上降低了烯烃转化率、异构烷烃增加率和芳烃增加率。提高原料预热温度可以一定程度上增加烯烃转化率、异构烷烃增加率和芳烃增加率。催化裂化汽油改质油剂混合区的最佳工艺条件为维持一定的反应温度和剂油比,并尽可能降低再生剂温度和提高原料预热温度。

关 键 词:催化裂化汽油  烯烃  改质  油剂混合区  反应规律  
收稿时间:2008-08-13
修稿时间:2008-11-06

Effects of the operating conditions in the mix zone on FCC naphtha olefin upgrading
WANG Gang,YANG Guang-fu,GAO Jin-sen.Effects of the operating conditions in the mix zone on FCC naphtha olefin upgrading[J].Journal of Fuel Chemistry and Technology,2009,37(3):311-317.
Authors:WANG Gang  YANG Guang-fu  GAO Jin-sen
Abstract:The factors affecting FCC naphtha olefin upgrading, such as the preheating temperature, regenerated catalyst temperature, mix temperature and catalyst to oil ratio in the mix zone were investigated in a continuous pilot riser-type FCC unit. The results showed that low regenerated catalyst temperature, low mix temperature and low catalyst to oil ratio can reduce the yield of coke and fuel gas, but impair the FCC naphtha upgrading effectiveness. The temperature of catalyst regenerated is the main factor that ...
Keywords:FCC naphtha  olefin  upgrading  mix zone  reaction behavior  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《燃料化学学报》浏览原始摘要信息
点击此处可从《燃料化学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号