Binder melt: Quantification using SEM/EDS and its effects on composite solid propellant combustion

The present study reports the development of a novel technique to quantify binder melt on the surface of the propellant. Non-aluminized AP-HTPB propellants of 86% particulate loading are used to illustrate the technique. Elemental maps of unburnt and extinguished propellant surface are obtained using EDS (Energy Dispersive Spectroscopy). Overlap between the elements is identified and the elemental maps are processed to calculate AP and binder area exposed in unburnt and extinguished samples. The AP area exposed is found to be around 72.3% and 63.3% for unburnt and extinguished samples, respectively, indicating a reduction in AP exposed area with extinguished samples. This has been attributed to the binder melt discussed in literature but never quantified. Simulations have been carried out to analyze and understand the effects of this binder melt. A random packing algorithm is used to simulate propellant packs. Also, a methodology to account for binder melt layer is introduced and is used to capture AP exposed areas. Effect of binder melt in propellants with different solid loading and varying particle size is discussed. It is shown that fine AP particles are more prone to being covered by binder melt than the coarse AP particles. A possible explanation to the behavior of plateau burning propellants observed in literature has been provided through this analysis.