| Abstract: | The influences of alkoxy group number and loading method of silane coupling agents on the mechanical properties of a styrene-butadiene rubber/silica composite were investigated. Mercapto functional silane coupling agents with dialkoxy and trialkoxy structures were used. The pre-treatment method and the integral blend method were compared. Both the fracture stress and modulus at 200% strain were higher in the pre-treatment than in the integral blend for dialkoxy type composites. However, they were higher in the integral blend than in the pre-treatment for trialkoxy-type composites. The interaction between the silane chains on the silica surface and the rubber molecular chains at the interfacial region was estimated by 1H pulse nuclear magnetic resonance spectroscopy using an unvulcanized silica/rubber mixture. It was found that the binding of rubber molecular chains by the silane chains was higher in the pre-treatment system for dialkoxy-type composites, whereas it was higher in the integral blend for trialkoxy-type composites. The reason is proposed as follows: in the pre-treatment for dialkoxy type, a linear silane chain formed in the case of multi-layer coverage. The silane chain entangled with the rubber chain in the interfacial region and improved the reinforcement effect. For the trialkoxy type, a network structure formed using the pre-treatment method, lowering the amount of entanglement. However, in the integral blend for trialkoxy type, the formation of the silane network and the entanglement progressed simultaneously during the preparation process. A well-entangled interfacial region was formed. |
