首页 | 本学科首页   官方微博 | 高级检索  
     

E面和H面方向图等化的双模圆锥喇叭设计
引用本文:秋实, 高红卫, 焦永昌, 等. E面和H面方向图等化的双模圆锥喇叭设计[J]. 强激光与粒子束, 2005, 17(08).
作者姓名:秋实  高红卫  焦永昌  刘国治  张福顺  侯青  贾鹏
作者单位:1.西安电子科技大学 天线与微波技术国家重点实验室,陕西 西安 71 0071 ;;;2.西北核技术研究所, 陕西 西安 71 0024
摘    要:
介绍用于Φ7.3 m Cassegrain天线的高功率馈源喇叭的设计。为使E面和H面方向图在照射区域内具有高的等化度,选择双模圆锥喇叭作为馈源的结构形式。由于高功率源采用BJ-32波导输出信号,故馈源系统中还应包含一个矩形到圆形的模式转换器,将TE10模转换为TE11模。设计了双模圆锥喇叭和模式转换器,并进行了功率容量估算。测试结果表明,所设计的馈源达到了设计要求,理论计算结果和实验测试数据吻合良好。

关 键 词:等化方向图   馈源   双模圆锥喇叭   模式转换器

Design of dual-mode conical horn feed with equal E and H patterns
qiu shi, gao hong-wei, jiao yong-chang, et al. Design of dual-mode conical horn feed with equal E and H patterns[J]. High Power Laser and Particle Beams, 2005, 17.
Authors:qiu shi  gao hong-wei  jiao yong-chang  liu guo-zhi  zhang fu-shun  hou qing  jia peng
Affiliation:1. National key Laboratory of Antennas and Microwave Technology,Xidian University,Xi'an 710071,China;;;2. Northwest Institute of Nuclear Technology,P.O.Box 69-13,Xi'an 710024,China
Abstract:
This paper presents a high power feed system for 7.3 m Cassegrain antenna. In order to make E and H patterns of the feed equal in the illuminated area, the dual-mode conical horn is chosen as the feed form. Since the high power signal is transmitted from the BJ-32 waveguide, a mode convertor from rectangular TE10 mode to circular TE11 mode in the feed system should be provided. The feed system, including a dual-mode conical horn and a mode convertor, was designed, manufactured, and measured. The measured results indicate that the feed system achieves the design goal, and the measured results agree well with the theoretical results.
Keywords:equal patterns  feed  dual-mode conical horn  mode convertor
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号