首页 | 本学科首页   官方微博 | 高级检索  
     检索      

相变换热混合工质板翅式换热器流动与传热数值模拟
引用本文:曲乐,贾林祥.相变换热混合工质板翅式换热器流动与传热数值模拟[J].低温与超导,2008,36(4):23-28.
作者姓名:曲乐  贾林祥
作者单位:1. 中国空空导弹研究院,洛阳,471009
2. 哈尔滨工业大学低温与超导技术研究所,哈尔滨,150001
摘    要:采用由SRK方程计算得出的混合工质物性参数,将具有相变两相流体物性分三部分处理,得出混合工质分段物性数据拟合曲线,并输入FLUENT软件的材料物性数据文件中,作为数值模拟物性参数数据。在上述物性数据处理的基础上,对混合工质天然气液化装置中换热器采用分段方式进行稳态数值模拟研究,得到沿长度方向一定温度下传热系数、压力梯度的变化曲线。通过与MUSE软件数据比较,计算结果有一定合理性,所得结论为有相变换热的混合工质低温板翅式换热器的设计和优化提供一定参考。

关 键 词:低温传热  混合工质  相变换热  板翅式换热器  数值模拟
修稿时间:2008年1月2日

Numerical simulation of fluid flow and heat transfer of refrigerant mixture for plate-fin exchanger with phase change
Qu Yue,Jia Linxiang.Numerical simulation of fluid flow and heat transfer of refrigerant mixture for plate-fin exchanger with phase change[J].Cryogenics and Superconductivity,2008,36(4):23-28.
Authors:Qu Yue  Jia Linxiang
Abstract:The thermal properties of refrigerant mixture were calculated with SRK equation.The temperature range of two-phase fluid with phase change was divided into 3 sections and the piecewise curve of the mixtures was formed.The data of physical properties were typed to FLUENT database and used for numerical simulation.Based on data analysis above,the heat exchanger in natural gas liquefaction system was simulated in the piecewise mode and the curve of heat transfer coefficient and pressure gradient vs temperature was formed. Compared with MUSE software,the mechod is reasonable.The desing and optimization of heat exchanger can be used as the guidance on the design of plate-fin heat exchanger.
Keywords:Cryogenic heat transfer  Refrigerant mixture  Heat transfer of phase change  Plate-fin heat exchanger  Numerical simulation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号