Preparation and Application of Fullerene C60‐Polymers in Piezoelectric Quartz Crystal Sensors for Hemoglobin and Olefins

The C60—polycinnamaldehyde (C₆₀—PCA) and C60—polyphenylacetylene (C60—PPA) polymers were synthesized by the Friedel—Craft reaction and applied as piezoelectric (PZ) quartz crystal coating materials. A C60—polycinnamaldehyde (PCA) coated piezoelectric quartz crystal liquid sensor with a homemade computer interface was prepared and applied as a PZ hemoglobin sensor. The adsorption of hemoglobin onto the C60—PCA coated crystal resulted in a decreased oscillating frequency. The variations in crystal frequency were converted to voltage with a frequency to voltage converter, followed by amplification with OPA and data acquisition with an analog to digital converter. The PZ hemoglobin sensor exhibited good sensitivity of 6530 Hz/(mg/mL) with a detection limit at the ppm level for hemoglobin. Further, a C60—polyphenylacetylene (C60—PPA) coated piezoelectric quartz crystal gas sensor with an Intell‐8255 data processing system for various olefin vapors was also made. The aromatic hydrocarbons such as toluene seem to have greater adsorption onto C60—PPA membrane than alkynes, alkenes, and alkanes. The adsorption of polycyclic aromatic hydrocarbons (PAHs) onto the C60—PPA membrane was also examined. The C₆₀—PPA coated PZ crystal gas sensor showed much better sensitivity for PAHs than for other olefins such as toluene, 1‐hexyne and 1‐hexene, and a much larger frequency shift for naphthalene than other PAHs was also found.