首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于微蒸发腔制冷的大功率激光二极管制冷组件
引用本文:范嗣强,潘英俊.基于微蒸发腔制冷的大功率激光二极管制冷组件[J].发光学报,2015,36(10):1207-1211.
作者姓名:范嗣强  潘英俊
作者单位:1. 重庆大学 光电技术与系统教育部重点实验室, 重庆 400044; 2. 重庆师范大学 重庆市级高校光学工程重点实验室, 重庆 400047
基金项目:国家自然科技基金青年基金(61008059); 重庆市教委应用基础研究项目(KJ060816); 重庆市科委前沿基础研究项目(cstc2014jcyjA70005)资助
摘    要:利用节流的高压冷却介质在微蒸发腔内相变吸热,设计了一种用于大功率激光二极管制冷的封装组件。该组件采用高热导的无氧铜,用精密线切割、化学腐蚀等技术制作微蒸发腔,再通过自制的焊接设备完成制冷组件的封装。按照大功率激光二极管条的发热模型,理论上对微蒸发腔制冷组件的温度分布进行了数值模拟,结果与60 W激光二极管条的散热实验符合较好,得到制冷剂流量为23 m L/min时的热阻为0.289℃/W。

关 键 词:微蒸发腔  大功率激光二极管  热沉
收稿时间:2015-07-29

Micro-evaporation Cavity Cooling Module for High Power Laser Diode
FAN Si-qiang,PAN Ying-jun.Micro-evaporation Cavity Cooling Module for High Power Laser Diode[J].Chinese Journal of Luminescence,2015,36(10):1207-1211.
Authors:FAN Si-qiang  PAN Ying-jun
Institution:1. Key Laboratory of Optoelectronic Technology & Systems, Ministry of Education, Chongqing University, Chongqing 400044, China; 2. Chongqing Key Laboratory of Optical Engineering, Chongqing Normal University, Chongqing 400047, China
Abstract:Based on the theory of phase change decalescence of throttled cooling medium with high pressure in the micro evaporation cavity, a new pack module was designed for the refrigeration of high power laser diode. Oxygen-free copper with high heat-conducting was adopted in the module. The micro evaporative cooling module was constructed with the process of wire-electrode cutting, chemical corrosion, and welding by the newly designed welding equipment. According to thermal model of high power laser diode, numerical simulation is conducted theoretically on the module, and the result is consistent with the experiment of the heat dissipation of laser bar with the power of 60 W. From the experiment, the thermal resistance is 0.289 ℃/W when the refrigerant flow rate is 23 mL/min.
Keywords:micro-evaporation cavity  high power laser diode  heat sink
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《发光学报》浏览原始摘要信息
点击此处可从《发光学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号