红外导数光谱鉴定铁系复合氧化物中γ-Fe2O3

Identification of γ-Fe2O3 in Ferrite-ferric Oxide Catalysts Using Second Derivative IR Spectra

It is well known that γ-Fe_2O_3 is a very active and selective catalyst for okidative dehydrogenation ofbutene to butadiene. It is hard, however, to distingulsh between ferrite spinels and therefore to identify its existence in ferrite-ferric oxide catalysts using XRD. On the IR spectra γ-Fe_2O_3 has characteristic bands in the range of 600~800 cm~(-1), which do not exist for α-Fe_2O_3, Fe3O4, ZnFe_2O_4 and MgFe_2O_4. But these bands are too weak to deterAnne for the small amount of γ-Fe_2O_3, e g. less than 30% (mass fraction), in catalysts.
Usually using second derivative IR spectra can increase the analytical sensitivity substantially. The mechanical mixtures of γ-Fe_2O_3 and MgFe_2O_4 in different ratio were prepared and their second derivative IR spectra were taken. It was found that the bands 730 and 695 cm~(-1) were characteristic of γ-Fe_2O_3 and their intensities increased with the content of γ-Fe_2O_3 in the mixtures. A staight line with R=0.994 can describe the relation between γ-Fe_2O_3 content and the peak area of band 695 cm~(-1). The lowest detectable content of γ-Fe_2O_3 is about 1% (mass fraction). The existence of γ-Fe_2O_3 in the used B-02 comercial catalyst was identified by this method.