| Abstract: | Concurrent Solvent Recondensation Large Sample Volume (CRS‐LV) splitless injection overcomes the limitation of the maximum sample volume to 1–2 μL valid for classical splitless injection. It is based on control of the evaporation rate in the vaporizing chamber, utilization of a strong pressure increase in the injector resulting from solvent evaporation, and greatly accelerated transfer of the sample vapors from the injector into the inlet of an uncoated precolumn by recondensation of the solvent. The sample vapors are transferred into the column as rapidly as they are formed in the injector (concurrent transfer). 20–50 μL of liquid sample is injected with liquid band formation. The sample liquid is received by a small packing of deactivated glass wool positioned slightly above the column entrance at the bottom of the vaporizing chamber. Solvent evaporation strongly increases the pressure in the injector (auto pressure surge), provided the septum purge outlet is closed and the accessible volumes around the vaporizing chamber are small, driving the first vapors into the precolumn. Transfer continues to be fast because of recondensation of the solvent, obtained by keeping the oven temperature below the pressure‐corrected solvent boiling point. The uncoated precolumn must have sufficient capacity to retain most of the sample as a liquid. The experimental data show virtually complete absence of discrimination of volatile or high boiling components as well as high reproducibility. |
