| 不同间隙条件下的叶顶区流动 |
| |
| 引用本文： | 王正明,贾希诚,王嘉炜.不同间隙条件下的叶顶区流动[J].工程热物理学报,2003,24(2):228-230. |
| |
| 作者姓名： | 王正明 贾希诚 王嘉炜 |
| |
| 作者单位： | 中国科学院工程热物理研究所,北京,100080 |
| |
| 基金项目： | 国家重点基础研究项目(No.G1999022309)，国家自然科学基金资助项目(No.59976046) |
| |
| 摘 要： | 本文用数值方法研究带有间隙的三维叶栅叶顶区的流动。对于不同大小的间隙及环壁静止与旋转的不同壁面条件,揭示了叶顶区流动的细节。计算结果表明,叶片当地厚度与间隙高度之比过大过小的情形均不易形成叶顶分离涡,相比轮毂静止的情形,轮毂转动时较不易形成叶顶分离涡。
|
| 关 键 词： | 叶轮机械 不同间隙 叶顶区 分离涡 |
| 文章编号： | 0253-231X(2003)02-0228-03 |
| 修稿时间： | 2002年12月26 |
THE FLOW IN BLADE TIP REGION UNDER DIFFERENT CLEARANCE CONDITIONS |
| |
| WANG Zheng-Ming JIA Xi-Cheng WANG Jia-Wei.THE FLOW IN BLADE TIP REGION UNDER DIFFERENT CLEARANCE CONDITIONS[J].Journal of Engineering Thermophysics,2003,24(2):228-230. |
| |
| Authors: | WANG Zheng-Ming JIA Xi-Cheng WANG Jia-Wei |
| |
| Abstract: | The now in blade tip region 0f tne three-dimenstonal cascade was investigated, oy numerical method in this paper. The details of the flow in tip region were predicted under different clearance scale and the condition of both stationary and rotating hub. The computed results show that if the ratio between blade local thickness and clearance highness is too large or too small, the separation vortex will generate difficultly, and under the condition of rotating hub the separation vortex in tip region will generate more difficultly than under the condition of stationary hub. |
| |
| Keywords: | turbomachinery different clearance blade tip region separation vortex |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
