Effect of temperature on the surface phase behavior of n-hexadecyl dihydrogen phosphate in adsorption layers at the air-water interface

We present the adsorption kinetics and the surface phase behavior of n-hexadecyl dihydrogen phosphate (n-HDP) at the air-water interface by film balance and Brewster angle microscopy (BAM). A phase diagram, which shows a triple point at about 25.8 degrees C, is constructed by measuring the surface pressure (pi)-time (t) adsorption isotherms. Below 25.8 degrees C, each of the pi-t curves shows a plateau at about zero surface pressure indicating the existence of a first-order phase transition. The BAM observation confirms the order of this phase transition by presenting two-surface phases during this plateau. However, the BAM observation also shows clearly another second-order phase transition from an isotropic phase to a mosaic-textured liquid condensed (LC) phase. The initial phase is a gas (G) phase. Considering the peculiarity of the middle phase, we suggest this phase as an intermediate (I) phase. Above the triple point, the pi-t curves predict the existence of two-step first-order phase transitions. Similar to the results at lower temperatures, the BAM images show two-surface phases during these first-order phase transitions together with a second-order phase transition from an isotropic phase to an LC phase. These transitions are classified as a first-order G-LE (liquid expanded) phase transition, which is followed by another first-order LE-I phase transition. The second-order phase transition is an I-LC phase transition. Contrary to these results, at 36 degrees C both the pi-t measurements and the BAM observation present only two first-order phase transitions, which are G-LE at zero surface pressure and LE-LC transition at higher surface pressure. The shape of the domains during the main transitions shows a peculiar change from a circular at 20 degrees C to an elongated at 24 degrees C and finally to a circular shape at 36 degrees C. Such a change in the domain shapes has been explained considering the dehydration effect at higher temperatures as well as the nature of phases.