|
|||||
|
|
| 均匀设计法研究丙烯酰胺在聚羟基丁酸-戊酸膜上的可控接枝 | |
| 引用本文： | 袁军,罗晓刚,解孝林,郑启新.均匀设计法研究丙烯酰胺在聚羟基丁酸-戊酸膜上的可控接枝[J].功能高分子学报,2007,20(2):163-166. |
| 作者姓名： | 袁军 罗晓刚 解孝林 郑启新 |
| 作者单位： | 1. 华中科技大学生命科学与技术学院,武汉,430074;武汉工程大学湖北省新型反应器与绿色化学工艺重点实验室,武汉,430073 2. 武汉工程大学湖北省新型反应器与绿色化学工艺重点实验室,武汉,430073 3. 华中科技大学化学系,武汉,430074 4. 华中科技大学生命科学与技术学院,武汉,430074 |
| 摘 要： | 利用均匀设计和二次回归分析方法对聚羟基丁酸-戊酸P(HB-co-HV)膜的固相接枝聚合条件进行了研究,得到了膜接枝率与实验条件之间的回归数学模型。通过4组不同实验条件下的接枝聚合结果验证,利用该回归数学模型可以设计不同接枝率的实验条件,达到定量控制接枝率的目的。 |
| 关 键 词： | 聚羟基丁酸-戊酸 固相接枝 均匀设计 二次回归分析 |
| 文章编号： | 1008-9357（2007）02-0163-04 |
| 收稿时间： | 2006-11-14 |
| 修稿时间： | 2006-11-14 |
Controllable Modification of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Films Grafted with Acrylamide Using Homogenous Design |
|
| YUAN Jun,LUO Xiao-gang,XIE Xiao-lin,ZHENG Qi-xin.Controllable Modification of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Films Grafted with Acrylamide Using Homogenous Design[J].Journal of Functional Polymers,2007,20(2):163-166. | |
| Authors: | YUAN Jun LUO Xiao-gang XIE Xiao-lin ZHENG Qi-xin |
| Institution: | 1. Department of Life Science, Huazhong University of Science and Technology, Wuhan 430074, China; 2. Hubei Key Lab of Novel Chemical Reactor and Green Chemical Technology, Wuhan Institute of Technology, Wuhan 430073, China; 3. Department of Chemistry, Huazhong University of Science and Technology, Wuhan 430074, China |
| Abstract: | The experiment conditions of solid phase graft modification of poly(3hydroxybutyrate-co-3-hydroxyvalerate)(P(HB-co-HV)) were studied using homogenous design,and the regression mathematic model between grafting ratio and experiment conditions.By using the mathematic(model,) the experiment conditions,for example,grafting ratios can be designed.The results of four sets of the experiment proved that experiment grafting ratios were basically consistent with foregone grafting ratios. |
| Keywords: | poly(3-hydroxybutyrate-co-3-hydroxyvalerate) solid graft homogenous design square regression analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |