Quantitative limits of thermal and fluid phenomena measurements using the neutron attenuation characteristics of materials

Temporal and spatial resolution of the neutron radiographic technique were investigated in order to apply this technique to the visualization and measurement of thermal and fluid phenomena. The temporal resolution of three imaging methods of temporally resolved neutron radiography-static neutron radiography with a pulsed neutron beam and high frame rate neutron radiography with either a pulsed or steady neutron beam-was studied. It was determined that the temporal resolution was determined by the sensitivity and light decay time of the image detector and statistical variation of neutrons, and the resolution limits of static and dynamic imaging methods were estimated to be a few microseconds and a few hundred microseconds, respectively. An image processing method was proposed to measure flow characteristics such as void fraction. By performing an error analysis to calculate the limit value of liquid film thickness that can be measured by neutron radiography, it was determined that the limit value of a rectangular channel gap or round tube diameter should be smaller than 3.25 or 4.00 mm, respectively, for measuring the void fraction of air-water flow within an error of 10%. The void fraction measuring method was experimentally confirmed by comparing the void fraction values in a rectangular duct with a 2.4-mm gap obtained by neutron radiography with those obtained by optical and conductance probe methods. It was shown quantitatively that the measurement error decreased when consecutive frames were temporally integrated.