Copolymerization of norbornene with ω‐alkenylaluminum as a precursor comonomer for introduction of carbonyl moieties

Norbornene copolymers functionalized with methyl ester group or carboxy group are facilely synthesized by the copolymerization of norbornene and 7‐octenyldiisobutylaluminum (ODIBA) with ansa‐dimethylsilylene(fluorenyl)(t‐butylamido)dimethyltitanium ( 1 ) activated by Ph₃CB(C₆F₅)₄, and the sequential CO₂/methanolysis reactions or CO₂/hydrolysis reactions, respectively. The methanolysis and the hydrolysis are simply switched by engaging acidic methanol or acidic aqueous acetone as the quenching/washing solution, respectively. Meanwhile, the increase of ODIBA in the copolymerization abruptly decreases the yield and number–average molecular weight (M_n) of the product. However, the addition of triisobutylaluminum (8 mM) and the use of excess Ph₃CB(C₆F₅)₄ (twofold of 0.4 mM of 1 ) significantly increase the yield, accompanying the increase in the M_n and the narrowing of the molecular weight distribution (M_w/M_n), especially in the case of the use of excess Ph₃CB(C₆F₅)₄. The yield (g polymer/g monomers), M_n, and M_w/M_n reach up to 0.82, 341,000, and 1.46, respectively, at a copolymerization condition. The carboxy groups in the norbornene copolymers are controlled in the range of 0–1.8 mol % in high polymer yields with high M_n and narrow M_w/M_n accompanied by the decrease in the contact angle with water from 104° to 89°. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5085–5090