Numerical study of sliding wear caused by a loaded pin on a rotating disc

A computational approach is proposed to predict the sliding wear caused by a loaded spherical pin contacting a rotating disc, a condition typical of the so-called pin-on-disc test widely used in tribological studies. The proposed framework relies on the understanding that, when the pin contacts and slides on the disc, a predominantly plane strain region exists at the centre of the disc wear track. The wear rate in this plane strain region can therefore be determined from a two dimensional idealisation of the contact problem, reducing the need for computationally expensive three dimensional contact analyses. Periodic unit cell techniques are used in conjunction with a ratchetting-based failure criterion to predict the wear rate in the central plane strain region. The overall three dimensional wear rate of the disc is then determined by scaling the plane strain wear rate with a conversion factor related to the predicted shape of the wear track. The approach is used to predict pin-on-disc test data from an Al-Si coating using a tungsten carbide pin. The predicted results are found to be consistent with measured data.