|
|||||
|
|
| 1 MA直线型变压器驱动源模块设计 | |
| 引用本文： | 周良骥, 邓建军, 陈林, 等. 1 MA直线型变压器驱动源模块设计[J]. 强激光与粒子束, 2010, 22(03). |
| 作者姓名： | 周良骥 邓建军 陈林 戴英敏 王勐 谢卫平 丰树平 杨礼兵 |
| 作者单位： | 1.中国工程物理研究院 流体物理研究所, 四川 绵阳 621 900 |
| 摘 要： | 介绍了输出电流幅值为1 MA，电流上升时间为100 ns的快脉冲直线型变压器驱动源（LTD）模块的设计。模块由48个子块并联组成，每个子块由2个电容器和一个多级气体开关串联组成。48个开关由8路高压脉冲触发，每路高压脉冲（100 kV/50 ns）触发6个开关。电路模拟显示，在充电 90 kV条件下，输出电流幅值为1.04 MA，电流上升时间为84.5 ns（0~100%）和52 ns（10%~90%）。电路模拟时的参数设置以实验数据为基础，开关的工作条件与已研制成功的100 kA-LTD模块中的开关工作条件近似，模块设计工作于腔体注油状态以保证高压运行安全，能够保证模块达到设计要求。 |
| 关 键 词： | 快脉冲直线型变压器驱动源 多级气体开关 电路模拟 机械设计 |
Design of 1 MA linear transformer driver stage |
|
| zhou liangji, deng jianjun, chen lin, et al. Design of 1 MA linear transformer driver stage[J]. High Power Laser and Particle Beams, 2010, 22. | |
| Authors: | zhou liangji deng jianjun chen lin dai yingmin wang meng xie weiping feng shuping yang libing |
| Affiliation: | 1. Institute of Fluid Physics,CAEP,P.O.Box 919-108,Mianyang 621900,China |
| Abstract: | The design of a 1 MA linear transformer driver(LTD) stage is introduced, whose current risetime is 100 ns. The stage consists of 48 parallel bricks, each of which consists of two capacitors (40 nF/100 kV) and a multi-gap gas switch in series. The 48 switches are triggered by 8 high voltage pulses (100 kV/50 ns) with each pulse triggering 6 switches. According to the simulation results, when charged to 90 kV, the output current of this stage is 1.04 MA, and the current risetime is 84.5 ns (0~100%) and 52 ns (10%~90%). Simulation is based on experimental data. Work conditions of the switches are similar to those in 100 kA-LTD stage which has been tested successfully before. The 1 MA-LTD stage will be filled with transformer oil to ensure safty when charged to high voltage. |
| Keywords: | fast linear transformer driver stage multi-gap gas switch circuit simulation mechanical design |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 | |
| 点击此处可从《强激光与粒子束》下载全文 | |