| 高氢容量硼氢化锂/碳气凝胶复合材料的制备与性质北大核心CSCD |
| |
| 引用本文： | 杨曦,付志兵,周清晓,袁磊,张厚琼,王朝阳,唐永建. 高氢容量硼氢化锂/碳气凝胶复合材料的制备与性质北大核心CSCD[J]. 强激光与粒子束, 2013, 25(12): 3274-3278 |
| |
| 作者姓名： | 杨曦 付志兵 周清晓 袁磊 张厚琼 王朝阳 唐永建 |
| |
| 作者单位： | 1.中国工程物理研究院 激光聚变研究中心, 四川绵阳 621 900 |
| |
| 基金项目： | 中国工程物理研究院技术发展基金项目；国家自然科学基金项目 |
| |
| 摘 要： | 采用"纳米装填"技术和"熔化渗透"工艺成功制备了氢容量在硼氢化锂质量分数80%以上的硼氢化锂/碳气凝胶复合材料。并用扫描电镜、透射电镜、傅里叶红外透射光谱等手段表征了复合材料的结构与性能。发现硼氢化锂填充了碳气凝胶骨架孔隙的90%以上,形成均匀的复合材料。研究了复合材料的形成机制,发现硼氢化锂先进入碳气凝胶骨架的小孔,再逐渐填充大孔。这有利于材料晶粒的细化,提高吸放氢性能,减少结构缺陷。经放氢动力学测试表明,LiBH4/CRF复合材料的放氢速率是文献中LiBH4与活性炭的球磨样品的5倍。
|
| 关 键 词： | 硼氢化锂 碳气凝胶 纳米装填技术 高氢含量复合材料 |
| 收稿时间： | 2013-07-23 |
Preparation and study of LiBH4 incorporated in carbon aerogel |
| |
| Affiliation: | 1.Research Center of Laser Fusion,CAEP,P.O.Box 919-987,Mianyang 621900,China |
| |
| Abstract: | The lithium borohydride incorporated within carbon scaffolds was prepared by its confinement to the nanoscale into a nanoporous carbon aerogel. The host within LiBH4 loading reached 80%. The structures and properties of the products were investigated by using scanning electron microscope (SEM), transmission electron microscope (TEM), infrared absorption (IR) spectra, and so on. LiBH4 filled the micropores in carbon aerogel firstly. Then LiBH4 incorporated together with the mesopores. Dehydrogenation rates at 300 ℃ were up to 5 times faster than the reported results observed in the sample of LiBH4 mixed with nonporous graphite. |
| |
| Keywords: | |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
|
点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|
