Finite deformation analysis of COD,J-integral and crack tip intense strain region in plane strain large-scale yielding |
| |
| Authors: | M Saka T Shoji H Takahashi H Abé |
| |
| Institution: | Department of Mechanical Engineering, Tohoku University, Sendai, Japan;Department of Engineering Science, Tohoku University, Sendai, Japan;Department of Mechanical Engineering, Tohoku University, Sendai, Japan |
| |
| Abstract: | A finite element analysis was performed to simulate crack tip blunting and the development of the intense strain region in a small compact tension specimen (0.4 T CT) of SA533B-1 under plane strain large-scale yielding, with the condition of large-geometry change around the crack tip taken into consideration. The region where the equivalent plastic strain g3p is greater than 0.15 was defined as the intense strain region, which corresponded to the recrystallized-etched zone delineated experimentally around the blunting crack tip. The development of the intense strain region was discussed as a function of the J-integral and the crack opening displacement. A linear relationship was obtained between the plastic work Wp dissipated within the intense strain region and (J/σy)2 or b2, where b is the crack opening displacement, defined as the separation of the two points at which the boundary of the intense strain region surrounding the crack tip intersects with the free surfaces of the crack. |
| |
| Keywords: | To whom all correspondence should be addressed |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
