| 纳米级LiFePO_4材料的水热模板法合成及其性能研究 |
| |
| 引用本文： | 王思敏,郑明森,董全峰.纳米级LiFePO_4材料的水热模板法合成及其性能研究[J].电化学,2008,14(4). |
| |
| 作者姓名： | 王思敏 郑明森 董全峰 |
| |
| 作者单位： | 厦门大学固体表面物理化学国家重点实验室;化学化工学院化学系; |
| |
| 基金项目： | 防基础研究项目(xMD)
，
福建省省部产学研项目
|
| |
| 摘 要： | 采用水热模板法合成纳米级LiFePOd材料,改变水热反应中表面活性剂(十六烷基三甲基溴化铵)的比例控制样品颗粒生成的大小.SEM测试表明,合成的LiFePO4晶粒尺寸与表面活性剂的配比密切相关,范围在几十到几百nm之间.充放电试验表明,合成的纳米级LiFePO4材料电极具有优良的电化学性能,其0.1C放电最高比容量可达150 mAh/g,而1C和2c放电比容量也分别有140 mAh/g和126 mAh/g.
|
| 关 键 词： | 锂离子电池 磷酸铁锂 水热模板法 |
The Hydrothermal Synthesis of Nanoscale LiFePO_4 and its Electrochemical Performance |
| |
| WANG Si-min,ZHENG Ming-sen,DONG Quan-feng.The Hydrothermal Synthesis of Nanoscale LiFePO_4 and its Electrochemical Performance[J].Electrochemistry,2008,14(4). |
| |
| Authors: | WANG Si-min ZHENG Ming-sen DONG Quan-feng |
| |
| Institution: | WANG Si-min,ZHENG Ming-sen,DONG Quan-feng*(State Key Lab.of Physical Chemistry of Solid Surfaces,Department of Chemistry,College of Chemistry , Chemical Engineering,Xiamen University,Xiamen 361005,Fujian,China) |
| |
| Abstract: | The cathode materials of nanosiged LiFePO4 were prepared by hydrothermal templating synthesis.The grain sizes and electrochemical performance of LiFePO4 were controlled by surfactant.It was shown that the grain sizes varied from less than a hundred to hundreds nanometers by the SEM images.In the charge/discharge tests,the discharge capacities of the sample as a lithium ion battery were achieved to 150 mAh/g at 0.1C,140 mAh/g at 1C,and 126 mAh/g at 2C,with good cycling performance. |
| |
| Keywords: | lithium ion battery LiFePO4 hydrothermal templating synthesis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
