Characterization of Silicate Complexes in Aqueous Sodium Sulfate Solutions by FAB-MS

When the sodium ion (Na⁺) concentration is increased above 0.5 mol-dm⁻³ (M), the concentrations of dissolved silica in aqueous sodium chloride (NaCl) and sodium nitrate (NaNO₃) solutions decrease because of the salting out effect. On the other hand, the concentration of the dissolved silica in aqueous sodium sulfate (Na₂SO₄) solutions increases monotonously as the concentration of Na⁺ is increased above 0.5 M. The purpose of this study is to determine the reasons why the salting-out effect is not observed in Na₂SO₄ solutions. FAB-MS (Fast Atom Bombardment Mass Spectrometry) was used to sample directly the silica species dissolved in aqueous Na₂SO₄, NaCl, and NaNO₃ solutions. In the FAB-MS spectra of these solutions, the peak intensity ratios of the linear tetramer to the cyclic tetramer largely increased for Na⁺ concentrations between (0.1 and 1) M. This shows that some characteristics of the Na₂SO₄ solutions are similar to those of the NaCl and NaNO₃ solutions. In Na₂SO₄ solutions, however, when the concentration of Na⁺ is higher than 1 M, the peak intensity of the dimer is much higher than those of the other silicate complexes. In Na₂SO₄ solutions, the SO₄²⁻ ion undergoes partial hydrolysis to form HSO⁻₄ and OH⁻ is produced. In particular, in the range where the concentration of SO₄²⁻ is high, the pH of the solution increases slightly. This higher pH yields more dimers from the hydrolysis of silicate complexes. This increase in dimer production agrees with the observation that silica dissolves in sodium hydroxide (NaOH) solutions mainly as a dimer when the concentration of NaOH is less than 0.1 M. In Na₂SO₄ solutions at high concentrations, a salting-out effect is not observed for silica. This is due to the increase in the concentration of OH⁻, which accelerates the hydrolysis of silica and results in dimer formation.